What tweeters for a 2nd gen?

What tweeters are recommended for a 2nd gen? In the upgrade threads I've seen the OEM tweeters have an oblong bracket which mounts to the door, all the aftermarket speakers I've found are round. Or am I just missing something?

 

I've also noticed in almost every install video it shows a cross over being added. Is this a requirement? How does the oem speaker work without it?

 

Do those Subaru tweeters mentioned on another thread direct fit on late model 2nd gens?

I see ********* sells an adapter plate for mounting component tweeters as replacement to the OE units, see link:

https://*********.com/product-category/toyota-tacoma-audio-products/double-cab-audio-products/

 

I've asked about the Subaru tweeters in the 3rd gen thread but no response so far.

 

Check out post #304...plastic template used for mounting tweeter w/ stock tweeter bracket...I just ordered a nice set components for my front doors would like to use the included tweeter, looks like some minor fabrication is required.

https://www.tacomaworld.com/threads/diy-basic-speaker-upgrade-2nd-gen-access-cab.3198/page-16

 

A crossover is always used in a component, coax type speaker.
Coils, chokes, inductors are frequency reactive resistors so to speak. They provide an increasing resistance as the frequency increases. These limit high frequencies going to the woofer.
Capacitors, do the same thing, exactly opposite. They get used for the tweeters. The signal is also 180° out of phase to what goes in.

 

Your tweeter selection should be dependent on the woofer you're mating it with - not the truck. Of course fit is a consideration, but you want a certain Fs & frequency response - then narrow the fit down.

 

I added a tweeter; just added a blocking capacitor. Something like this:

https://www.ebay.com/sch/sis.html?_...MARINE+HOME+STEREO+BASS+BLOCKERS+SPEAKERS+100

 

If you’re interested, I have a Hybrid Audio Clarus 6.5 component set(Clarus 6.5 mids, Clarus Tweeters, Clarus Crossovers) and the adapters rings for both from Mr. Marv. The adapter rings were painted for weather proofing, and already have Second Skin Damplifier Pro on them.

If you are interested PM me, I’ll sell and ship everything for $425

 

I have all Alpine and put my tweeters in the plastic part that covers the mirror backs