What Have You Done To Your 3rd Gen Today?

.. There’s bunch of $$$ goodies of mods here and its quite addicting.. Beware! Welcome to TW

 

New metal bumper!

 

Hey, were you able to snap those right on or did you have to remove the outer housing to install them?

Thanks

 

I used this one. Two pack, used the second to help my daughter buckle up easier when she sits in her child seat.
Seat belt silencer -> Amazon (https://www.amazon.com/INTEY-Extend...1516128985&sr=1-5&keywords=seat+belt+extender)

 

I got mine for $79 off Ebay, and just looking at the construction they look a lot higher of quality than the factory; that being said I have noticed a bit more clarity and the overall sound quality seems better. I am sure the real difference would be made with the rest of the speakers being upgraded, since tweeters play more of a support role.

 

Thank you! I am sure if anyone else looked at my finances I would already of gotten in trouble, perks of not being married I guess

 

Ordered a set, thanks!

 

Had a sweet view earlier:

 

They’ll understand eventually! Lol

 

Yes, pretty much any tweeter will make an obvious difference, but those Subaru tweeters are a simple plug and play to the Tacoma tweeters, which makes it super simple to install.

Hell, my 10 year old makes better sounding music than the stock tweeters do. lol

 

$79?? Share the link!

 

Which one. Top or bumper?

 

I believe the difference is obvious. I used Memphis audio PRX27 (40$ for the pair from crutchfield is current quote). With the stock unit and there was a slight difference, but when I put the new headunit in it really took it to a new level with the highs bouncing off of the glass right into your face. only downside of these is they will need want an additional wiring harness unless you are good with soldering, and they need some "redneck engineering." you can get one bolt back in, but the other I just used a bolt with a washer so that the washer ring secures the other end in place.

 

This is the link:
https://www.ebay.com/itm/OEM-Tweete...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649

When I found it there was a button that said "15.00 off" and I didn't question it, so it was actually $73.45 to my door. I guess it was a sale they had

 

Did the same thing so my Shorthair and now my Lab could ride shotgun. More than one way to skin a cat without raising a flag or getting a rejection sticker at inspection time. Minimal expense and effort.

 

Not likely... 99% of the time you will have significant rubbing with that size tire with no lift. You could be okay with the right wheels depending on back spacing and off-set but not sure. I have 275/70/17 on the Sema TRD Pro wheels. 2.5" lift front/back. Even with that much lift I need to set my caster at 2.75 or higher to avoid rubbing on the cab mount.

 

Finally got my Mobtown Offroad sliders installed. If your thinking about these and on the fence I can tell you the engineering on these is sick and the customer service from Mobtown is first rate.

 

Well worth the money as far as I’m concerned! Sounds much better than the stock ones for sure.

 

Cheap and simple.
Before:

After:

 

Score.
Took a chance on a open box item on Amazon for $32. They’re in perfect condition.