Raleigh North Carolina and surrounding areas

Science/math and make my brain hurt question for all and @Blkvoodoo . On my lifted Miata with 27" tires. Currently have 4.10 gears, have some 4.78 from a Kia. But I've decided not to weld the rear (plan on driving it way more than originally thought) so going to get a factory LSD. There was a year that had the LSD and 4.30 gears. So would that be good enough or still do the 4.78 gears regardless

 

Im gonna put both spares and the high lift in the truck before I come down there tomorrow. Too bad I don't have the new wheels and tires yet to play in the snow

 

Whatcha doin tomorrow? Did I forget something?

 

Got about 5 inches in Apex...

 

welcome

 

I’d go with the Kia gears. Do you really think you’ll need a locker?

 

will the KIA gear set fit the Miata carrier ? or is it total swap of housing and all ?

the 4.30 gear might still be just a touch too tall, 5th gear would be useless in anything but flat road driving, you're on the coast so it may not be an issue

at that, how good is the motor ? is it strong enough to pull ?

 

130 hp plus those tires are a tall order lol. At least she’s light

 

Work sadly, they closed the site today

 

Yes the ring and pinion will fit my diff

 

i know its work, try the 4.30, see how it goes, if its a dog, measure everything before you pull it apart (backlash, pinion depth) then swap the gears over, should have the shims between the 2 diffs, just need a few seals and a crush collar or 3

 

After $150 of helping stick vehicles she needs a bath

 

She needs a garage, if your cold they are cold... bring them inside

 

I wish I could park it inside but sadly the family I live with refuse to let me park it inside.

 

Just measured on my deck and we've got a solid 4" here...5 in spots. Can't believe that the road and my driveway has almost 0. I'm guessing that it's so wet that the trees are grabbing it all since it's all tree lined.

 

I just bought a 12" vinyl cutter and it came with a bunch of sample 12"x12" sheets. I've cut a few stickers so far and they're turning out pretty good. I need some practice so give me some ideas. Multi color is fine. Keep in mind that you may get random colors for now but they're free so there's that I'm going to order some rolls soon but want to get the process down with the practice sheets first. Lemme know

 

If you get some blue in, want to cut this for me? Can be all the same color.

 

How wide? I’ll scale it to height

 

We got around 8" here in burlington roads are getting dicey with packed snow and ice. A second wave came through a little while ago and is now slowly petering off.

 

10-12?