3" lift with stock rims pics

Did you have to do any trimming? I’m about to put a 3” lift on my 2015 SR5 and I’m debating between 265s or 285s. I’m just wondering if I will need spacers or trimming in order to accommodate the 285s. Any advice?

 

I have a 3 inch lift with 285/75/r16 on stock wheels had to put 1.75 inch spacers to clear the control arm in the front getting new wheels though because spacers arent really good for your truck. Only way to fit that tire

 

Found this Performance Tread
$120 a piece 265/75/16 Falken Wildpeak A/T3W.

 

2012 TRD Offroad
3" Lift
1.25" Spidertrax
285/75/16 BFG KM2

 

What is that tire size? Lookin good

 

265x70x17 Duratracs.

 

Thanks. How you liking that fox shocks?

 

Love them, 35K miles on them now with no problems. There is a huge thread on them here. My truck now has plate bumper, 10K winch, skids, and side bars. Only lost about a 1/2" on the lift at the most.

 

285/70/17 Nitto Grapplers g2's with 2 inch leveling kit with Monroe air shocks in rear. 1.25 spydertrax added because of UCA clearance. I left mud flaps on but removed front mini flaps.

 

Go into the 3rd gen forum. I don’t think they will fit in the front with out some good trimming, a cmc probably need more than 3@ of lift. The 3rd gen guys will know for sure

 

I ended up going with 305's... 11 years ago...