Rancho Cucamonga Crew Roll Call

Danm right!
We are all there with you!!

As far as for people like you it gives us gratitude to do things like this!


My little 1.

@ODNAREM ^

 

This is going to be me when I touch down lol

 

Thank you Bruce for offering your place and for your help. It going to be good to see you again. It's been over a year I believe

@ODNAREM I hope your available too, to come by and get yours done too.

 

Hey guys next time you do Cleghorn or anything around this area hit me up I'm close like 20 min.
@Ozzy_Wuz_Here ... you're gonna love the setup.. I have similar setup minus the control arms and springs and it's a huge improvement..

 

That’s what I’m talking about!

 

“Spark Plug” and her skills!Got any of that A1 sauce to spare?
That .22 is a blast to shoot!

 

Thanks man and we’ll see.

 

Nice! Wish I could make it out there, have some morning plans, but if I can get out early enough I'll do my best. Congrats Daniel! @1truckdriver

 

Yo Tacoma family. Daniel will be at my place at 9:00 AM Sunday for suspension work. Join us if you can. Mason are you coming too?

 

I will try to make it but I'm not sure if i can swing it.

Congrats @1truckdriver !!

 

Thanks guys. Hopefully you guys can stop by for a bit. My friend Greg Redjeep is going to join and lend a hand.

 

Daniel i’m unable to make it tomorrow to help/assist with the install.Don’t know if you ended up getting the installation instructions but here you go since i got them from the dealer when purchasing the kit.
I have to much storage on my phone so i took pictures for you since i was unable to download them to my phone and send it to you.

When reinstalling the bolts for the lower ball joints Johnston,Chan and i used the factory bottle jack turned upside down in the fender wells and cranked the jack to compress the upper control arms down to compress and aligne the lower ball joints to make reinstalling the bolts easier.

Be sure and play it safe by using some blue Loctite on the threads during reinstall as well as torquing to specs.

When mounting the rear shocks you’ll need to lower the spare in order to mount the bypass/resi bracket on the drivers side.You’ll also want to mount the shock after rotation along with the bracket and resi at the same time and then tighten straighten the bracket.If you tighten the bracket first you won’t be able to slide the resi in as easy as the bypass line will bind up.

Once all installed you’ll also want to adjust the rear shock boots upwards as they will be binded some from compressing the shocks into the upper shock mount frame location.After adjusting the shock boots i had mine measured out to 2 1/2 inches from the bottom of the TRD decal to the top of the boot as that what Chan suggested and did.

I also haven’t adjusted my headlights yet and don’t believe it’s necessary at this time to do so since they’re both still aligned and driving the last couple days at night i haven’t noticed that the headlight’s aren’t in the proper position when behind other vehicles etc.You can determine for yourself with your truck.

 

Daniel @1truckdriver also since the rear shocks don’t come with new shock/frame bushings here is the Toyota part numbers.Mine were worn with a few noticeable cracks and possibly could of been reusable but i chose to purchase new ones for better piece of mind and have everything new.

Hope everything works out great and look foward to hearing about the completion.If you have any further questions send me a text or tag me on the thread.

 

Thank you very much Ron for the info pics and advise. It would have been nice to see you again and hang out but I understand scheduling doesn't permit so it'll have to be some other time. Bruce, Greg and myself got this.

 

You’re welcome man!We’ll link up soon.It’s been to long.You got the team to knock it out with Greg and Bruce!Tell them hello for me.You’re going to be stoked once installed!

 

Yes sir. I'll give them your regards. Maybe we can get another future mod day for the UCA and AAL install. I'll post pics

 

Didn't get to do the install. My help flaked on me , so this is getting postpone . Cancelled. Thanks Bruce for offering your place.

 

Yeah I was pretty bummed out but I'm over it now. My next weekend is booked so this will have to wait two weeks unless I have my wife take my truck to a shop while I'm at work. I'll get er done one way or another

 

If you can wait, I will be down for the next one as I am sure @ODNAREM will too. Save the cash.