Raleigh North Carolina and surrounding areas

From what we saw with the kit that was installed at the SC mod day is it has notches in the strut body for the clip. I haven't seen anyone disassemble them to see if you could go higher than what they were assembled as. But there were definitely notches under the lower perch to go lower.

 

2-2.5" all the way around and I'll be happy

 

2.5" is what Tim got out of his TRD kit. Now you will need an AAL for the rear which is the way I would go with that kit.

 

@voz just get the Dakars for the rear.

 

ARB EL096R LEAF SPRING HD

https://www.amazon.com/ARB-EL096R-L...id=1520264806&sr=8-1-fkmr0&keywords=EL096R+X2

 

Those are sold per side, you need 2

 

correct... thats for the HD set

 

The HD set is the same as the Standard old set https://www.tacomaworld.com/threads/new-ome-dakar-leaf-pack-review.489540/

 

Hmmm what all does it come with? You'll need U-bolts with them

 

Get a u-bolt flip kit.

 

@voz here is the kit medium duty would suit you unless you are going to get a cap or something comes with CB drop, u-bolts, etc. Free shipping from HS as well

https://www.headstrongoffroad.com/store/p462/Old_Man_Emu_Dakar_Leaf_Package_-_DakarPKG.html

 

Or that. The snowball effect of a lift has commenced, now don't forget new bumpstops, what else can we tack on to this tab here.

 

PTR1335150 no longer for sale..

 

From where? call around to the dealerships here. It's just temp out of stock on that Amazon link.

 

https://parts.sunrisetoyota.com/p/T...GRT41ubfm2T873t9dFh8IZy8clPExYZRoC7s8QAvD_BwE

 

How about a nice set of stock 2016 Off Road suspension, lol. Kidding of course, I just need to get this stuff out of my garage

 

Since you have a truck like mine, you should get the kit like mine

https://www.headstrongoffroad.com/s...Kit_w/_OME_Dakar_Leaf_Packs_-_05__Tacoma.html
https://www.headstrongoffroad.com/store/p64/Camburg_1.25"_Uniball_Upper_Control_Arms_-_310036.html

 

Do you want to squeak everything the truck moves?

I had tc uca for a few months and hated the noises it made. @Red Baron rembember them?

Go with spc or jba. Spc is nicer because of the adjustability and they have an new x axis bushing. However jba is easy to replace balljoint on the trail since it uses a Chevy(iirc) ball joint

 

I've had mine for a a year and a half....no squeaky. I grease them up the zirks when I change the oil.

 

Mine was coming from the uniball when turning.