NFA wait times and BS thread

Thanks guys, I know what it means I was talking about my previous post. I didn't know where in the 45 pages where it was posted. The op doesn't say if he filed his form 4 or form 1 as trusts or individuals.

 

No worries It was a trust. I'll update the OP with that info

 

That's good. They where 11 months just a little while back.

 

Yea I cant believe it's been a 6.5 months and it's already back. I'm glad to see the times are finally going down

 

Surge 7.62 - F4 Trust

Pending: 4/17/17
Corrections: 3/6/18
Approved: 3/14/18
Received: .....

Worst wait by far....

 

Nice!! Now you gotta take it to the range!

 

Waiting for the stamp to arrive atm. Hope it doesn't take a month to get to my dealer..

 

From what I’m told they ship out in batches and take up to 30 days. Hopefully it’s not that long. What rifles you putting it on?

 

Did you call to find out?

 

7.62x39 SBR and a 16" Daniel Defense for the time being.

Yes

 

Nice! How short? Just curious. The surge doesn’t have barrel length requirements.

 

11.5

 

So after lots of thinking and changing different grips, foregrips, BUS’s, etc, and months of putting little pieces on here and there because of personal stuff, she’s ready for some range time.

YHM Mod 2 Upper
JoeBobOutfitters Spartan Lower (aka really a NewFrontier Lower)
Law tactical folding stock adapter gen 3
Rainier Arms/Faxon 8.5in 5R CL barrel in 300blk
FZ BCG
Diamondhead VRS-X 8.5in FF handguard
DPMS LPK
random ambi safety I had
MFT minimalist stock
Tacfire 5/8-24 7.62 comp
UTG Apache foldable foregrip
MBUS gen 2 sights
BCM A-44 charging handle
Superlative Arms “bleed off” adjustable gas block
Brownells nitride pistol length gas tube
SI take down pins and forward assist
Ergo original grip (a copy of my form1 is folded up inside )
Forward assist and comp in stainless ad alittle flare to an almost all black SBR
Also have another stock for testing
She’s beefy

 

Rocksett will come off fairly easy. It’s good for temps but can’t take a whole lot of torque. That or soaking it in hot water. If you send it back it NEEDS to have the brake sent in too. This will help them determine what is going on. I’ve met Mike and Gary a few times. They’re solid guys and will take care of you.

 

This ^^
Hot Water will make rocksett disintegrate.

 

Red loctite is defeated via heat, if you heat the muzzle device at the threads, loctite MFG says up to 500 degrees, let it cool a little and then dissassemble it should come apart with a small amount of torque.

 

Torch that fucker off. Don’t use a wrench until it starts smoking. Matter fact let it smoke for a good 15 seconds. I’ve burned off more loctite than the average bear.

 

Sent my form 4 off on 7-29-17, approved 3-1-18, Picked it up from the dealer today.

 

Who was it a couple of months ago that had to send their surefire back? Did he ever update?

 

Congratulations! Stamp days are some of the best days.