A probably foolish question

Does anyone know if Chevy S10 15" aluminum rims will fit? The bolt pattern, rim width and offset are the same. And if the rims fit will the Toyota TPMS aluminum wheel sensors fit GM rims...

 

In theory yes, but i think even toyota 15” rims come close to the caliper. My worry would be chevy rims being a little different and rubbing the caliper. And no clue about tpms

 

Just FYI, not a foolish question.

 

I will have a set of four left when my S10 takes the recycle nap, I will bolt one up and report.

They have a set of grabber a/t's mounted and I was hopeful

I like the look of the wheels, actually. One of the best things about that POS. Pretty sure the bow tie can be "buffed out".

 

Arent S10 wheels a 5x120 bolt pattern?

 

All the places I have looked list S10 wheels as 5x4.5, same as Tacoma. All aftermarket though, such as tirerack. FYI, they (tirerack) do NOT sell any wheels that do not use adapters! I will not use any wheels that require them - fail tech inspection at most competition events, apparently not some off-road however...

BTW, hope I see your level of MPGs.

 

Not sure if all S10's are the same, but just checked fitment for a 98 and it was listed as 5-475 which I think is close to 5x120.

https://www.tirerack.com/wheels/Whe...&autoModel=S10+4wd&autoYear=1998&autoModClar=

 

Yeah s10 isnt the same as us

 

Wow, I don't know how I misread that - I blame doing my taxes, form 1040 causes brain rot.

Saves me hoisting a wheel and doing the jiggle and wiggle until I notice the pattern is just a wee bit off, like me most mornings.

I could have sworn the S10 said 5x4.5 - ah, well, I will put those rims on CL.

 

S10 doesn't fit but Colorado is close. I run 16" 1500 alloy rims that I first had to punch out the center hole to fit a Colorado and then had to punch em out again to fit the Tacoma. Biggest problem was getting the center covers to fit as the 1500 took bigger lug nuts and I couldn't find the smaller ones with an outside thread the same as the covers. I did find nuts that would fit the studs and then made alu. adapters with the id thread off the lug nuts and the od thread that fit the caps. The colorado and the Tacoma take the same size lug nuts. I do get some weird looks at the bowtie on the covers.

 

curliegreen welcome to TW

post some pictures of those wheels on your truck please?