Traction control light stuck on

Just put Bilstein 5100s on my 2013 TRD sport 4x4 tacoma 4dr and after it was all installed it turned on the traction control light and it hasn't gone away. I just got it realigned today and it is still on. Had the neighbor come over and check the codes and it isn't throwing any codes. Also I did try the button to see if I bumped it on and no dice. New to this forum just got the truck like 2 weeks ago need some advice.

 

I've heard it mentioned that sometimes you need to recalibrate the system after a lift install

 

If that's the case.....sit tight. Someone will chime in with the how-to soon

 

check the wheel speed sensor wires

 

Here ya go
https://www.tacomaworld.com/threads...ibrate-your-vsc-computer-the-easy-way.467485/

 

if you had lift installed and aligned, you have point zero calibration performed to adjust the steering angle sensor back to spec and you will be fine.

 

Thanka guys got it dialed in now!