What have you done to your Tacoma today? 1st Gen Edition

Scangauge II

was it a URD blower or TRD? I seriously doubt a TRD could break 400hp on those. URD though totally possible.

It should just be large washers and those cushions.

 

I didn't think there was a difference from the TRD supercharger and the URD one

 

2nd gen taco

 

Ah ok

 

It was a TRD blower, with one of the smallest pulleys, their MP90 blower is good to 18k rpm so you can make some serious power with a tiny pulley. Plus he had good supporting mods like solid tune, 650cc injectors and upgraded intercooler plumbing. He is in the process of having LCE build a stronger 1GR for him now and getting a Haltech standalone.

 

Why not flip that bracket? So what if the SGII blocks the tape deck slot. When was the last time you ran a tape, for that matter.

 

You’d have to flip it and bend it, it’s angled. Could be done I guess but I don’t have any problem seeing the display. I took the truck on a road trip with it mostly on 5th gear and it wasn’t blocked.

 

This the right kit for timing belt / water pump? I see there's also one with a PCV (which I think I want to replace), but it doesn't have the gasket, so I'll likely just pick those up from camelback...

http://ebay.us/hxSxmg

 

You should be good with that kit. One I bought was $235 I don't see much of a difference between them.

 

Finally primed and painted my fender flares

 

Found this on my truck earlier today. Sara must be out of her fucking mind if she thinks I’m parting with this truck.

 

Got to love that 2k clear coat. To bad it expires in two days after you mix it.

 

Is she hot?

 

My buddy asked the same question

 

I was looking at that kit last night, will have to do this with my next oil change. Was curious if it was legit as well as I want it to last 90K

 

I made sure I used all of it.

 

I think @Timmah! has some videos on doing timing belt, water pump, etc. for our trucks.

 

Step one, remove parts carefully
Step two, revserse of step one even more carefully

 

Hey guys, so I’ve had my truck almost two years now and have put about 45k miles on it. Also it went over 200K on our last toad trip. I’m looking to do a service to include plugs and plug wires, as well as anything else that is recommended at this milage. Any advice and or recommendations is welcome.

 

And if you have extra bolts you win.