What Have You Done To Your 3rd Gen Today?

Yeah I like those also. Got a parent who needs the step to get in. I missed a used set on Craigslist for $100. Gonna keep watching for them.

 

Hello all, I am looking for a link to the write-up I saw on here a couple weeks ago. It was for the subaru tweeter upgrade. I thought canyero had posted it. I tried the search and looked through his old posts but could not find the one that showed removal of the pillar panels.

 

Premium audio upgrade for less than $250. Try that search.

 

30 day vacation and quite a lot done

Cost about $200

U Bolts, they were slightly loose
Zerks grease front Redline Synth
Painted Bed Rails Hammered
6 D Rings in the bed Bolts Mod
Silicone 3rd Brake Light
ARB Rear Diff Breather
TRD Ammo Cans
TRD Tie Downs
Aluminum Badges

 

Thanks. I have this thread saved.

 

Pillar panels are simple. Just remove the srs cover on driver side with a small flat plastic pry tool then remove the 10 mm bolt. Then it slides out easy. Passenger side remove the 2 little caps on the handle to get to the 10 mm bolts.

 

I'm guarding one with you. Salute!

 

Just finished the install of my OEM TRD Pro grill. Removing the old grill was a giant pain in the ass. I probably broke half the tabs trying to remove it. I love the new grill though!

 

$60 on ebay.

https://www.ebay.com/ulk/itm/362072401561

I plastidiped mine and they came out great. I bought another set off a member on here that I plan on painting legitimately.

Or I might sell them for what I paid for them and buy the ones off ebay. However, I do not think the ones on ebay are an exact match. Still undecided.

 

Look at my post above. $60.

 

https://www.tacomaworld.com/threads/how-to-subaru-toyota-3rd-gen-tweeter-upgrade-holy-s.540548/

 

Not really a 3rd Gen mod... but a Toyota Landcrusier GShock showed up in the mail today!

 

Analog watch is only way to go imo.

 

Yup those should do.

 

The guys at buggywhips sent us a pair of LED lights to run under the awning. mocked up placement on main arm and secondary at rear of truck. Waiting on clamps, tekflex, and deutsch connectors to install this saturday

 

For about the same money you can replace the plastic with metal.

https://www.tacomaworld.com/threads/mobtown-aluminum-tailgate-plate-cover-3rd-gen-tacoma.543437/

 

Total Chaos, you can get them for about $150 on sale and black out the bolts with paint after install.

You can do the Dring mod in the bed Bolts at the same time, it’s a little involved but cool to have six tie downs and they hide under the mat when not using them.

I really thought long and hard what to do and not to do with the truck. I’m trying to keep it clean, useful and looking like stock.

http://www.chaosfab.com/2016-2017-T...MI5q39gNj82gIVTlmGCh3cqQApEAMYASAAEgJoT_D_BwE

Actually, I’ve spent well over $800 with all the mods in the bed, but useful. The black ammo cans are really cool and bolted to the bed rail on top of the wheel wells. They hold a shit ton, easily assessable and I can still keep a 6 foot bed and no big tool box.

 

Any tips or concerns when you did this? Doing this soon also with a holster i made for my last vehicle. Looks clean. Oddly enough, been looking at an Alien Gear holster for concealed carry.

 

Don't forget to check out the Inferno thread...

https://www.tacomaworld.com/threads/inferno-thread.391466/

 

I like the group buy suggestion for this.