APR X-1 Launch Control

Well I hooked up my laptop ran Xtune with my truck running, and it can't connect. I'm trying to see what tune I have and if there is a better one out there.

Also can I take it to a local tuner to help tune it ? Or am i screwed since APR went of of busniess?

 

You just have have to make sure that you have the file installed in your xtune folder, for the file that is on your X-1.

Otherwise you won't be able to do anything.

 

Okay how do I get the file that is on my x-1 (Tta40.04xf.MK2_s3_12.aprCal) ( wrong file i need) to my desktop?
I'm trying to install file Tta40.03A.MK2_s2.03.AprCal ( F3)

Also I do not see a MRK2 kit on URD web page, only MRK3 now. How do I determine what MRK I have ?

 

I try to flash it and it shows 4 percent then freezes every time.

 

When i try to re flash the X-1 with an available calibration under the AprCal node by drag/dropping onto the Xport X-one device I get this error :

 

Do you have a USB stick? If so, add it to the USB stick. Then plug the USB in. Whenever a USB is plugged in, the X-1 goes off of that file.

Then make sure you have the appropriate file on your X-1 program, on the laptop.

 

thank you for your time and help.
I do have a thumb drive, I cleared the USB drive and added the file to the USB. This error it still shows, after i click okay it will show that file Tta40.04xf.MK2_s3_12.aprCal in the X port.

 

Dang.

 

I believe the USB thumb drive map/file is working. My truck is running alot smoother with it plugged in. Although when i plug in the laptop along with the USB thumb drive it wont cooperate with Xtune for live data. I'm thinking this is because of the installed map on the
X-1 . I think I need to have a hard copy of the map/file on my computer, that is on the unit in order to change to another map/file.

 

Well that is at least some really good news!