Custom Switch Panels

As long as you have a unit without the side wing/mounting tabs you are fine.

 

@mesojdm hey I'm very curious in this picture of your custom switch panel, did you coat the panel or paint it with a texture? I've been testing and testing different textures and paints and can't find anything I really like. Thank you for any information on it!

 

I installed panels on the left and center and am trying to relocate some switches from the left side to the center. I need to lengthen the wires and I am just curious, what gauge and type of wires did ya'll use to relocate your switches?

 

I've been curious about the same thing. If the wire gauge size works out (which I think would be ok for most switches), thermostat wire from your local hardware store may be a good idea. It's nice because it comes with (8) 18-guage wires individually color coded and wrapped in a single bundle. This would make it easier to relocate multiple wires from one side of the steering column to the other. You can also get 5 wire thermostat wire since most switches are only 4 or 5 connections, but the (8) wire version is not that much more expensive.

https://www.homedepot.com/p/Southwi...AjQjEALw_wcB&dclid=CPLzo5L5ltsCFRDH4wcdmbsBrg

 

18 gauge is more than enough for switch wiring.

 

Me-so! Im trying to buy some blanks to go with my 7 switch but cant figure out how to order them... help me out?

 

More panels in stock ready to rock.
I have the following;
Lower panels:
LSP7
LSP6W
LSP5.1

Cubby's:
CPSP
CP8
CP4P
CP6.1W

and SWITCH BLANKS too

 

Do you know when you’ll be making more cpspw’s?

 

They were supposed to be in this batch but somehow did not get added. I’ll run them next print

 

Awesome! I’m in when they come out!

 

Hey @mesojdm - Any chance you'll have a flush mount switch pro panel for this? I didn't see that option on page 1.

 

Must have missed the CP6.1W again. Waiting on the next batch!

 

Installed my new CP6.1w yesterday as well as moved some switches around. I really hated where the usb port is so I moved it to the left of the steering wheel as well as the ect switch.

2 things I noticed when installing it in my 2017 is that it's a super snug fit and I noticed that the behind the upper far left switch opening is the mounting location for the factory one so I couldn't install an actual switch there as the back would hit. I need to get a picture of this to make more sense, but here's a picture of what I have right now.

 

Running 4 switches on top where there wasn’t meant to be any, I knew some minor trimming behind the dash would be needed. Also, I did make it on the tighter side on purpose, I hate loose/ratteling panels.

 

Ahh, I didn't realize that! Thanks very much! Just ordered the cpsp! Appreciate the help.
Shannon

 

@mesojdm the CP6.1W.....what are the actual switch cut outs size on the upper row of 4 holes. I can’t deal with this anymore. I’m looking at the air onboard 32.5mm by 22mm is this the correct switch to fit your panel. Thanks for the help

 

Upper 4 holes are the same size as your 400w power inverter button.

 

For the record I want to make sure you and everyone else knows that I am not bitchin at all, just wanted to report just in case others come across it

I am happy with the fit and like that its snug and I can live with that switch location having something behind it because that is where my bass knob will probably ended up

Overall i am super happy with it and no regrets purchasing and installing it.

 

Wow, those went fast I guess I'll have to wait for the next batch of cubbies. At least I got the 6 switch with rear window n some blanks. Thanks again Meso your the best

 

@mesojdm will the power inverter and the clutch disable switch fit in the 6.1w?