South Carolina BS thread under new MANAGEMENT and lives in SC

The ome shocks are just about the same length as stock, within an inch if I recall correctly

 

I still have them

 

Where did you get the coupon from? I could use a good recovery strap.

 

for 3 beans I would get it

 

As long as we're talking suspension setups, I'll cross post what I added to my build thread earlier:
Spent a little time in Eddy's shop this weekend. We pulled my Allpro expo leaf pack out and swapped it for a set of Chevy 63s. Also pulled my rear Bilstien shocks and replaced them with 2.5" 14" travel remote resivior Kings.



This is how it looked with my OME 886s up front and the 63s in the back.


But we weren't done yet.

Gusseted the coil buckets up front. Then installed these:

They did add an inch of down travel as advertised. OME on the drivers side, King on the passenger


I need to adjust the preload on the kings, the front is sitting back at factory ride height right now. Controll arms are flat. But it does prove you can clear 37s with no lift. I ordered a cheap spring compressor this weekend. When it comes in @ahspurlock and I will get them adjusted:




[/

 

I'm gonna pick this up before @Sandman614 and I go run recovery for the Gambler500

 

Do eeet

 

Start over in a couple years when my girl gets out of school. I have the new powertrain for it. As soon as my shop is built (when the rain stops) I'm gonna strip the axles out of it and sell them to buy the axles I want. Gonna go bigger stronger and more power. Tons and 40s have been done to death. Untill then this will be my go to rig and the focus of my attention.

 

I picked up an 01 Chevy 2500 4x4 with a 6.0,4L80E and NP241 for $1300 a while ago. It's sitting in my yard. I'll rob the powertrain from it and add a little power. Axles will be Axletech 4000s. 9ton axles from mine sweeping equipment. Fuck bulletproof, these are bombproof.

 

And a prinsu

Ours stayed on 70 with the old system. New system is 74 but feels the same

I love that show. Delores keeps me watching it partly too ha

We got a Leesa last Black Friday. That’s a damn good mattress.

Isn’t that the meat meet weekend?

And so the picking begins...

Took me two days to get caught up after being off my phone all weekend... y’all were busy

 

Haha!! Idk. But there again.....im trying to keep him away from alcohol and drugs.

 

Saw that. Sounds like bs to me.
That ole biatch signed her retirement papers.
Did you see all the channels that canceled her reruns?

 

I'm on Johns Island now...you guys are welcome to use my spring compressor and/or anything else needed anytime.

 

Thank you. I ordered a chinese one, more out of curiousity then anything else. It was only $100. If that looks like a loser, or like its gonna get one of us killed I'll be taking you up on that.

 

Yeah man...no worries! Even if you guys need to grab it and use it at your leisure vs at my place, I'm ok with that too.

 

Thats pretty much why I grabbed it. This is the one I ordered. Adam and I will let you know if its worth the money:

Goplus 20" Strut Coil Spring Press Compressor Hand Operate Auto Equipment Compress, Red

https://www.amazon.com/Goplus-Compr...1567&sr=8-22&keywords=strut+spring+compressor

 

Do it

 

Definitely do it

 

An LT kit would be a perfect Father’s Day gift for yourself.

 

Had a break in rain. So I said. Fuck it, time to cut grass. BTW... Shitters full