FS-Custom 2, 3, 4, 5, 6, 8 and 10 switch plates

47mm x 60mm face dimensions for the horizontal 2x2 mount.

 

Thanks, but I’m looking for the horizontal 4 in a row and five in a row.

 

The 4 in a row is 109mm x 47mm. The 5 in a row is 134mm x 47mm

 

Are these still for sale? I'm looking for a 2x2 if you got it, thanks!

 

PM sent

 

What is the width (in inches) of the 1x4?

 

I’ll get back to you in about an hour.

 

outer dimensions are 109mm x 47mm or 4.29" x 1.85"

 

@docloco does the single switch mount include the surrounding mounting pad like in this pic or is it literally just the single switch socket? I'm assuming just the socket.




I'm looking for a single switch mount with extra material like in the pic above to cover a 2 1/16" gauge hole I made in my shifter bezel since I'm going to relocate the gauge.

 

It is only the mount for the switch. The picture you quoted is a customers pic of how he mounted it.

 

That's my rig. It's a @docloco single-switch bezel mounted on top of an @XPOTRPR Switchpro custom bezel; I asked him to print one for me with no holes, then I manually cut the single-switch hole and holes for the other buttons. I dunno if XPOTRPR is making those anymore, he might be on hiatus.

If you need to cover a big hole, I'd just get a docloco 4-switch or 6-switch mount and fill the other switch holes with blanks - then you have more real estate available for later accessories!

 

I may be able to get another one of those done. Just pm me!

 

I'm interested in the 6 button one. Can you give the outside measurements of the 3X2?

 

61mm x 117mm. I'll send you a PM for payment details.

 

@Muddinfun pointed me to this thread from a question I asked about a different question. Thank you by the way!

@docloco, Do you know if either of the 3 or 4 switch plates will fit on the sun glass door?

From what I can tell, these use the small switches like what is in the Center console under the HVAC?

If the 4 switch plate fits in the sun glass door, are you still selling them?

Thx

 

@docloco how do I go about getting one with 4 switches? Is the color black? And this will fit either switches from Air on Board or from CH4x4? And do you have any pictures of anyone mounting to the sun glass door? Is it possible to make the outer flange bigger so it can be bolted with either #4, #6, or #8 fasteners in the corners? Sorry for all the questions

Thanks

 

I’ll send you a pm later tonight on ordering details. Yes, switch plates are black. Yes, they’ll fit air on board or ch4x4. Page 1 should have a pic of a single switch plate on a sunglasses holder. I’ll discuss the mounting options in the PM. No worries on the questions.

 

Sounds great.

 

I was wondering if you can create a five switch plate with a cigarette lighter option to go right into where the stock 4 switch/2 lighter section is