2008 Tacoma 4x4 Wilmington NC

2008 Toyota Tacoma 4WD Short bed White

4.0 V6, Automatic 113,000 miles will go up, my DD

I have owned the truck since new. It’s a great truck, I just don’t use it as it should be used anymore. It has been on Nittos tires driving line page, cover of Four Wheeler magazine. Most of the build happened in the summer of 2015. The truck at one time was running 315’s (hence cut fenders CMC and flares) in the past year i simplified some stuff due to only driving on the street. Below is list of mods that are currently on the truck. With little tweaking (needs little more tweeking on suspension) be ready for trail riding and camping again. In town fine, on highway with gearing not great on gas. Will come with some if the stock parts I kept. NEVER been mudded

Please call for more info , located in Wilmington NC

$20,500 sold AS IS


INTERIOR

*Clazio front and back seat covers (drivers side bottom is cracking)

*Toyota OEM Vinyl floor kit

*rear cubbies behind seat removed for more storage (believe still have them)

*LED interior bulbs

*Dash and radio switched to Blue and white LEDS

*Dash switches been changed

*LED 4x4 switch

*2x dash mount Ram Mounts

*tinted windows (front two redone july 4th week)

*Brake controller

EXTERIOR

* re-sprayed OEM white 2015

*line-ex bottom of doors

*Retro 80’s 4x4 badge

*Black grill with Horn Toyota emblem

*classis 80’s Toyota mud flaps (rear)

*Depo black headlights

*single row Light bar

*Cali LED hood brackets with there Side shooter LEDS

*VooDoo bed rails and tail gate cap

*stainless cover put on tailgate for flat cooking prep surface

*Fender flares with black hardware

*front fenders cut about 2”

*Cab Mount Chop

*beat in pinch welds

*rear flares bolted to the bed



UNDER HOOD

*Airflow snorkel

*Plugs about 100000 miles

*regular maintance with good fluids

*motor completely stock

*ARB compressor with Vivair manifold Needs check have added (comes with one)

*Has on board air, with air chuck front and rear

*2 gallon (I believe 2 Gal) tank under the bed

*secondary fuse block setup

*new battery July 4th week


ARMOR

*BruteForce fab front steel bumper with LED fog lights

*ENGO winch in bumper

*BruteForce Fab HC rear bumper with hidden hitch, LED lights mounted in it

*rear bumper has swing out with jerry can holders and spare tire mount

*each bumper are modified for poles so can hang hammock from each side

*Comes with two sets of poles for Hammocks

*Had aluminum table made that mounts to rear swing out

*Does NOT have sliders now

*Total CHAOS spindle gusset

*Total Chaos lower A arm armor

*Total Chaos Cam Guard gussets

*crossover exhaust pipe modified and wrapped for skid plate

*No longer have skid plates


DRIVE LINE

*U Joints replaced in past year

*front wheel bearings replaced when did regear

*Drive shaft center bearing replaced with Ranger bearing MOD

*breathers mods on diffs

*front and rear extended brake lines

*ARB lockers front and rear

*4.56 gears front and rear Lucas gear oil in diffs

*Solid spacer kit with shims for diff

*front and rear diffs built by East Coast Gear Supply


WHEELS

*OEM Toyota steel FJ Cruiser rims powder coated white (5)

*Spidertrax Black wheel spacers

*black lug nuts

*NEW 285/70/17 Cooper Discover AT3 tires (put on July 4th week)


SUSPENSION

*Front King coilovers with remote res

*wheelers from bumpstops, comes with ¼ spacers (not installed)

*SPC upper a arms

*All pro Expo rear springs with newer bushings

*Toytec U-Bolt flip with new u bolts

*B.A.M.F rear shock relocate kit

*King rear shocks with remote res

*Archive Garage shackle flip kit







https://www.drivingline.com/articles/a-2008-toyota-tacoma-that-puts-the-fun-in-function/


Truck on Nittos Driving line page,

 

Few more pics

 

bump

 

sad days

good luck with the sale, the truck is sweet!

 

Thank you, i spent alot of time and money oh her

 

and time and energy i'm sure!

 

yes sir

 

bump

 

still for sale

 

How can I contact you

 

just pm you my number

 

bump

 

bump

 

still up for sale

 

up for sale again, was off the market due to Florance. Price now $20500

 

How did you rig up the hammock fittings? Great mod.

 

Just put some holes in bumper, welded in some pipe, and made poles out of smaller diameter pipe