Show off those 35's on 3rd gens

That opening is huge. Need to match the rears now

 

Still need to try pushing the alignment forward more(higher caster) but for now she slightly rubs at the cmc, frame, UCAs(SPC Light Racing) and some plastic but it’s not bad at all. Only when heavily flexing and turning does it rub.

Pulled the CO to see what needed trimming but when I thought it was 95% clear at full travel it rubbed like a mo-fo on the ground. Damn rubber bushings. Had to cut and sledgehammer three different times before I was happy with it.

Bent the pinch weld out and was able to tuck the liner behind it. The liner in the front was trimmed inside so I could pull it forward and re connect it with a new hole. SSO slimline bumper has a bracket to support the lower plastic bumper ends and liner which helps hold it forward. Also trimmed the inner fender flares at the top, front and back. At the top I re connected the liner with a zip tie and pulled out the fender a little. I also have super bumps with spacers.

The rear fits perfectly without any trimming but I have B110 shocks that are quite long.

 

Sup guys

 

Just wheeled for the first time on the dirties. Some slight rubbing on more extreme drops on to the front suspension (I.e. nosedive into a hole then having to drive back out), few good stuffs at full lock, but probably 80% of the time it was ok. Til my alignment got jacked from bouncing off rocks lol

 

Also this:

 

Merp*

 

Fender trimming coming soon

 

how bad do you rub man?

 

After a massive cmc and some SPC control arms I don't rub at all at ride height. I'll be pulling my COs to clearance the fenders for wheeling

 

What did you end up setting your alignment to +4 caster?

 

SPCs are set to the 3.75 position, and my alignment specs are at 2.4 degrees

 

^

 

Now that’s a fuckin’ CMC! Nice, can’t wait to do mine!

 

Almost there. I may be a tad bias (ply)

 

Staying tuned to this thread, hanging with some guys on 37’s and 35’s got me looking into 35’s as an option.

 

Just do it.

 

@JoeCOVA Roger that, the guys I roll with keep egging me on, the last time we worked on my truck they put one their 35” spares on my truck to “see what will be”. Gonna run the tires I have till they are unserviceable, and eventually make the jump.

 

what tire is that?

 

Goodyear Duratracs

 

Thanks!
I went the 255/85/16 route a few months ago and I frequently find my self on this dam thread reading the same pages.
I think its time