1st Gen Lunchtable Thread - General Discussion

I think you need to learn to drive it, and fix it up before you start spending money on it haha.


But I’m not your boss obviously

 

500$ can get you a good setup for a 4-3 or 3-3 or 3-2 depending how low you wanna go. Think custom taco kit like 250$ djm is lik 350$
If i was you i would look into the qa1 conversion and just put your 6lug leafs on when you put your all pros on the 6lug. Thats should be like a 3-2 drop no problem. And if you run smaller diameter tires then stock too it will lower you some

 

Also th qa1 are adjustable so you can change the front ride hight from stock to like a 3” drop

 

What’s the cheapest non ghetto method?

 

It’s ok I can drive it in 1st no problem.

 

Blocks and bj flip which is the custom taco kit. Even cheaper if you just buy the bj flip and use your 6lug leafs.

 

Low and slow

 

New tires and wheels

 

Streched wheels much. lookin like stance nation

 

Way bad huh

 

tyler's new ride...

https://youtu.be/fY0ehgSoX0Y?t=2m12s

 

But he cant weld...

 

.....I'm not exactly sure why but this photo kind of turns me on

 

If I’m just globbing mig wire on a diff then yes I can.

 

B̸̭̳̀̌͗͝Ĕ̵̱̪̄̇E̴͈͛͌̌F̷̖͍̪̈́̒͊ ̴͔͝͝C̶̛̺̤̫̥̍̅̈́U̶̧̓̿̑̀R̴͚̪̽͌T̴̥͒͒̽Ā̷̼̤͚̳̿̚I̶͉̲̬̻͂N̶͉̭̪̏̈̓̍͜Ş̵̌̆ͅ

 

@Speedytech7 i like the new picture on the 1st post lol

 

You guys are fucked up

 

Sony RX100 VI 20.1 MP Premium Compact Digital Camera w/1-inch sensor, 24-200mm ZEISS zoom lens and pop-up OLED EVF (DSCRX100M6/B)

Sony RX100 VI 20.1 MP Premium Compact Digital Camera w/ 1" sensor, 24-200mm ZEISS zoom lens and pop-up OLED EVF

https://www.amazon.com/dp/B07DKG29RG/ref=cm_sw_r_cp_api_-1auBbZ37TY5C


If I had 1200 to spend on a camera, this would probably be perfect for my uses.

 

No denying that, in fact I'll one up you...

Way more than you know!