3, 4, and 6 inch lift pics!

2 4-bangin 1st Gens with roughly 3" of lift. Mine up front sitting on 33"s and the other sitting on 35's

 

Here is mine with a 3" emu and 285/75/16 aka 32s and some change haha

 

4" lift on 285-70-17s

 

Here it is:

This has 5 inches of lift with 33X12.5R16 MTZ P3's:

 

Welcome to TW. Nice truck.

 

Thanks.It's my first Tacoma and love it.I'm getting ready to upgrade to 20" wheels and 33s here shortly.

 

Is there any rubbing with the 4 inch lift and the 285/70/17???

 

The drivers front tire will rub the mud flap a little bit on hard turns, but doesnt dig into it or leave any marks.

 

“Respect the 4 cylinder” that’s what I tell people when they give me shit

 

Does it have to be a four banger?

Here is 4-ish. 2.75 inches of suspension from Icon Extended travels. 1-inch body lift from Toytec. 35s.

 

So I know a lot of people on here are not fans of the RC db. But I want to ask anyway for the few who does have them on here and like it.

I'm deciding between the full OME setup with the 888s. Still debating on adding the light racing UCA or not. Read mixed reviews about OME supporting the stock uca. Thoughts?

OR considering the 4in rough country lift. Probably wont do the 6 because I want to run 33s, and not sure if I'm sold on the look of 33s and 6in lift.

The reason I'm torn is I dont do a lot of off roading. Hunting, light trails and mountain trips. That's about it. But yes, I want a lift and dont want to keep it stock. It simply looks better to me, but, I dont want sacrifice quality or performance.

So if I did the RC I could switch out the rear shocked, for 5100s, or I could spend a little more and do the OME setup with Dakars. But still n

 

My son has the Rough Country 6" for over a year, he loves it!

I just picked up a 2015, I am going with the Rough Country 4" and I am adding the RCD Bilstein's front and rear (making it a 5"ish lift) and a Wheelers 1.5" AAL.



And we are on the exact same page with our build and what for, my 1st stage video:

 

What did you do to fix the rear bumper gap?

 

The rear was custom fabbed by Bruteforcefab to accommodate the body lift. Same with my sliders from SOS (not in the picture above, but you can see them in the one included with this post). The front bumper is standard and has about an half inch gap. I drilled out the mounting bracket holes to bring it up as much as possible. The only way to fix it is cutting of the bracket and melting on a new and lower one.

If you had one made to order, I would just ask. They can make it so it will work for both a body lift and no body lift (it's just a longer bolt hole).

 

Nice, bro! Thanks a lot for the info! Awesome truck, btw.

 

what did you tell Alcan when you got them made? I want to have some made to level out a 6in lift I’m having installed