What have you done to your Tacoma today? 1st Gen Edition

Nah. Tubes.

 

Looks like you got the bed sides off?

 

He might

Welcome to the rake crewe.

 

Indeed I did. I just haven’t taken off the good ones off the 5-lug yet.

Looks like the unibody where the taillights mount to were destroyed in the rollover. There’s about 100 spotwelds holding that piece of the bed in that I don’t want to drill out, so I might have to cut and weld that section.

 

Friday - Mod day 1
Mounted new ToyTec 620# coils on my Bilsteins and installed them on my truck.

Saturday - Mod day 2
Lifted a 3rd gen with Bilstein adjust and AAL
Lifted another 3rd gen with Bilsteins, TC UCAs and Dakars in the rear.
Lifted a 2nd gen with Dakar (Heavys) and Camberg UCAs

Sunday - Mod day 3... lol

Diff oil change and Diff breather re-locate.

Rear diff breather run up to high point in engine compartment. Will splice into the hose to add the front diff breather (when I actually have a front diff...lol)

 

Not thinking to change your plan, but do you have a spot weld removal bit?

 

I do. A very good one, in fact:

Blair 11096 Cutter Set

$37 Blair - Spotweld Cutter Set 3 3/8In. Cutters Arbor & Pil (11096)

https://www.amazon.com/dp/B002XML5HK/ref=cm_sw_r_cp_api_dT3zBb2FA4034

 

Im back! Good times

 

Out the old tokicos and in the new 5100's with 881' way to much lift IMO hopping the go down icon 3 aal progresive is next for the back .

 

Those are 881s? No way...something isn't right. 881s shouldn't give more than 2", that looks higher than 3"

 

Yeap 881's i saw the sticker on the coils and yes i got more them 3" inch lift i also have 1/2 top plate spacer on driver side an 3/8 on the passenger side .

 

Some more pictures let me know if anything looks wrong

 

Like half inch spacer? That’s giving you like a 1” lift right there

 

Car wash day.. badly needed

 

Yea man 1/2 spacer on driver side and 3/8 spacer on pass side the rig sits at 39" from ground to fender event both sides

 

Nice! What place was this? I feel like taking my 84 to get dirty

 

it saw the sunlight for the first 2 years today. getting ready to pull the body and bed off.. frames being built by Toyota as we speak.. (old frame... hmm ideas. v12 long travel taco maybe?)

 

Dude...thats all wrong. How are you driving that???

You dont have Kings

Lol...jk...looks good man

lets go. Eagles lake near bowman

 

It drives fine drove on freeway like a champ no alignment needed i didn't loosen up the control arms . So is it good man o should i be concert about ubj's

Thansk

 

Fender flares, where?