First Gen Hood seal?

I'm looking for long rubber piece between the hood and grill for my 03 DC. Does anyone know what the part is actually called? I keep turning up multiple part numbers in my google searches and I dont know which is the piece I'm actually looking for thanks to crappy parts diagrams.

 

Does this help
http://parts.camelbacktoyota.com/pa...icleid=78973&diagram=8510112&diagramCallOut=2

 

I've see that one not sure if I need 2 or 4

 

Good post!

OP, when I replaced my hood seal, part #2, it came with the push in style plastic tabs.

Hope this helps you.

 

Does number 2 run the full width of the hood and fill the gap between the hood and grill when the hood is latched?

 

Yes it does.

 

Awesome! Thanks ordering today

 

According to that site (Camelback) it looks like the viewable rubber seal that runs the length of the hood, viewable from the outside front, is the outer seal listed as #4 or part 531830401. I called them for this info so hope they are right.

 

Mine runs the full length of the hood, not two separate items for me

 

If you do get this, may I make a suggestion. I sealed the entire length of it to the hood with marine glue. Eventually it will start peeling itself from the hood like the original otherwise. And dirt was getting in underneath the seal and spooging all over the underside of the hood with windage. Not anymore.

 

Going to order one myself!

 

Where are you seeing two items needed for that part? My understanding is that it goes the full width of the hood.

 

the early Tacoma like mine 97 has one piece and the later Tacoma use two strips, one inner and one outer

 

I have the one piece trim I was going to put on my 96 but it doesn't line up with the holes of the hood. I think mine came from a 98 or 99. Now I need to get rid of it.

 

Gotcha. I am guessing this part is only good for 2001-2004.

 

#4 or part 531830401 turned out to be the correct part for the seal that runs the length of the hood and is viewable from the front of the truck.

 

Just mentioning, the oem one for 01-04 comes with clips also. I didn't know & bought all new clips when I replaced mine earlier this year.

 

what clips did you buy?

 

90080-46010

 

I know this is an old thread, but just in case someone happens along looking for a cheaper alternative....
I had a garage door insulator I picked up somewhere. Used the old seal to line up for holes & cut outs & boila....

https://www.homedepot.com/p/DURA-LIFT-9-ft-Garage-Door-Foam-Bottom-Weather-Seal-DLSF9/305019860