1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

ATH FAB 05-15 Standard Rear Bumpers

Discussion in 'At The Helm Fabrication' started by At The Helm, Sep 11, 2018.

Page 1 of 10
  1. Sep 11, 2018 at 9:48 PM
    #1
    At The Helm

    #1
    At The Helm [OP] ATH Fab Vendor

    Joined:
    Mar 25, 2015
    Member:
    #151787
    Messages:
    1,321
    Gender:
    Male
    First Name:
    Morgan
    Gardnerville, NV
    Vehicle:
    2015 AC 4x4 TRD OR & 2019 T4R
    Kings, TC UCAS, SCS SR8's, ATH bumpers
    Standard Tacoma rear bumpers are a direct bolt on replacement designed to give better clearance and departure angle while staying tight to factory body lines, giving your truck a clean and aggressive look while offering added protection on the trail.

    2005-2015 Toyota Tacoma Standard Rear Bumper – At The Helm Fabrication (athfab.com)

    Features Included:

    • Built from CNC cut and brake formed 3/16″ HRPO steel plate.
    • 3/4″ thick shackle tabs pass through the bumper and welded front and back.
    • 10 bolt locations makes mounting rock solid. Uses factory threaded frame holes…no cutting, drilling or welding required for installation.
    • Holes for flush mount LED pods as backup lights. Fits most brands including Rigid Industries.
    • Hi-Lift jack slots for safer lifting
    • Standard 2” receiver included, either hidden behind plate or under license plate (your choice). Hidden receivers include a flip up license plate bracket. Receiver hitches are not officially load rated, but built plenty beefy. Receiver tube is reinforced with 2”x2”x.120” tubing spanning between the mounting plates.
    • Reuses factory license plate lights.
    • Trailer plug gets relocated under the bumper using included bracket…tucked up and out of the way where belongs.
    Available in bare steel only.
    Ships FedEx ground. Shipping cost ranges from $95-$300, depending on receiver style and distance from Northern Nevada. Bumpers with hidden style receivers are much less to ship as they don’t fall in fedex’s oversize range.

    Designed, built, and tested in the USA :oldglory:


    7057C77E-76B4-4F81-A877-0FB3E697C57A.jpg
    2115E3F7-9F90-4D93-A01F-D5EB5AB9AA4D.jpg
    BD8EEF50-3A58-40B0-BCA3-49015E0C88B4.jpg
    68DDEE00-9FCC-443A-82FE-5359EE877C13.jpg

    B50FA2FD-0443-4906-A0F9-86EC96D05622.jpg

    22DD0CEC-075A-48E2-892C-5C46BF7EA702.jpg
     

    Attached Files:

    Last edited: Jan 5, 2022
    At The Helm, Sep 11, 2018
    #1
    banditcamp, Freeheelbillie, rkarabao and 51 others like this.
  2. Sep 11, 2018 at 10:10 PM
    #2
    socalexpeditions

    #2
    socalexpeditions IG: @socalexpeditions

    Joined:
    Sep 22, 2017
    Member:
    #230791
    Messages:
    5,239
    Gender:
    Male
    Curious - When do you project a high clearance with swing out, fold down table, double jerry can holder, hi-lift mount, and spare tire carrier is going to be in production? :spending:
     
    socalexpeditions, Sep 11, 2018
    #2
    Thebubble, pwmullen3, ready6delta and 2 others like this.
  3. Sep 11, 2018 at 10:15 PM
    #3
    buckhuntin-tacoma

    #3
    buckhuntin-tacoma Shed hunter

    Joined:
    Dec 10, 2017
    Member:
    #238191
    Messages:
    13,927
    Gender:
    Male
    First Name:
    Dennis
    Quincy IL
    Vehicle:
    2014 Spruce Mica Tacoma DCLB
    4 inch lift - complete blackout, n-fab step bars, Black Horse bull bar, 20 inch light bar, anytime fog lights, added led day running lights, Fuel wheels and Falken Wildpeak tires ,custom fit seat covers, Gatorback mud gaurds
    Good looking bumper!!!
     
    buckhuntin-tacoma, Sep 11, 2018
    #3
    At The Helm[OP] likes this.
  4. Sep 11, 2018 at 10:19 PM
    #4
    Murphinator

    #4
    Murphinator Well-Known Member

    Joined:
    Mar 1, 2015
    Member:
    #149903
    Messages:
    3,205
    Gender:
    Male
    First Name:
    Anthony
    SoCal
    Vehicle:
    14 DCSB 4x4
    I know you said swing out version won’t be happening any time soon, but when you make it will it be strong enough to hold a 35” tire? I noticed mobtowns states 33” only. Basically why wait if my tire isn’t gonna work out on there, right??

    :drool:
     
    Murphinator, Sep 11, 2018
    #4
    At The Helm[OP] likes this.
  5. Sep 11, 2018 at 10:30 PM
    #5
    Martian__

    #5
    Martian__ Well-Known Member

    Joined:
    May 15, 2018
    Member:
    #253566
    Messages:
    732
    Southern California
    Man this looks sweet with the body lines. It’s hard to see how much the spare tire is exposed underneath. Will this also come with covers for the led pods if the buyer doesn’t want to install pods there?
     
    Martian__, Sep 11, 2018
    #5
    At The Helm[OP] likes this.
  6. Sep 11, 2018 at 10:38 PM
    #6
    At The Helm

    #6
    At The Helm [OP] ATH Fab Vendor

    Joined:
    Mar 25, 2015
    Member:
    #151787
    Messages:
    1,321
    Gender:
    Male
    First Name:
    Morgan
    Gardnerville, NV
    Vehicle:
    2015 AC 4x4 TRD OR & 2019 T4R
    Kings, TC UCAS, SCS SR8's, ATH bumpers
    I couldn’t give you an estimated date for those, but I will be building them at some point :thumbsup:

    I was going to shoot for a 35” max tire size on the tire carriers. :D

    I have some covers for them I can give you if you like :cool:
     
    At The Helm, Sep 11, 2018
    #6
    Slashaar, Alexely999 and Murphinator[QUOTED] like this.
  7. Sep 11, 2018 at 11:05 PM
    #7
    GHOST SHIP

    #7
    GHOST SHIP hates you.

    Joined:
    Mar 9, 2015
    Member:
    #150537
    Messages:
    22,295
    First Name:
    GHOST
    GHOST SHIP, Sep 11, 2018
    #7
    At The Helm[OP] likes this.
  8. Sep 11, 2018 at 11:37 PM
    #8
    seoulja99

    #8
    seoulja99 Well-Known Member

    Joined:
    Mar 8, 2016
    Member:
    #180618
    Messages:
    2,559
    Gender:
    Male
    First Name:
    E.J.
    Oahu
    Vehicle:
    2012 DCSB 4x4 V6 TX Baja (1GR-FE)
    all things mall rated
    This is awesome, Morgan! Congrats on the launch! Remember, don’t bite off more than you can chew. LOL.
     
    seoulja99, Sep 11, 2018
    #8
    YF_Ryan and At The Helm[QUOTED][OP] like this.
  9. Sep 11, 2018 at 11:49 PM
    #9
    Cody23

    #9
    Cody23 Well-Known Member

    Joined:
    Aug 25, 2017
    Member:
    #227982
    Messages:
    4,355
    Gender:
    Male
    First Name:
    Cody
    probably hunting or camping
    Vehicle:
    2022 TRDOR 6MT
    6112/5160 SCS 285s GFC
    :spending:
     
    Cody23, Sep 11, 2018
    #9
    ready6delta and At The Helm[OP] like this.
  10. Sep 12, 2018 at 12:06 AM
    #10
    Babyjake16

    #10
    Babyjake16 @project_traitor

    Joined:
    Sep 3, 2016
    Member:
    #196321
    Messages:
    659
    Gender:
    Male
    First Name:
    Jake
    Utah
    Vehicle:
    2008 Super White Tacoma
    33" Nitto Trail Grapplers 17" TRD Matte Black Wheels ICON Stage 5 w/ differential drop 30% Tint 2 - Pioneer 12" Shallow Mount Subs Focal Speakers Pioneer Head Unit 2 - Pioneer Amps Custom Stickers/Badges Paracord Grab Handles Painted Interior (all panels, headliner and carpet) Clazzio Leather Seat Covers with leather arm rests Ditch Lights 3 - 8" HieseLight Bars in bumper Rock Lights - Cali Raised LED Custom Fabricated Front Bumper - Blackout Fabrication Rock Sliders - DOSECC Fabrication Bushwacker Fender Flares (color matched) Morimoto LED Fog Lights
    Not gonna lie. This may be the best rear bumper I’ve seen to date! Killing it!! Any idea when you may start on a high clearance version? Definitely interested when one comes out so put me on a list!
     
    Babyjake16, Sep 12, 2018
    #10
    Nirvana, smw62891, YF_Ryan and 1 other person like this.
  11. Sep 12, 2018 at 12:58 AM
    #11
    20somethingwidataco

    #11
    20somethingwidataco Yes, my avatar is a real car.

    Joined:
    Nov 11, 2017
    Member:
    #235681
    Messages:
    6,259
    Gender:
    Male
    First Name:
    Will
    Washington State
    Vehicle:
    2008 AC TRD SPORT M/T
    ACLB 6 SPEED: Suspension: Bilstein 6112s (3rd perch) (F) Taco Lean Spacer Bilstein 5160s (R) TSB Leaf Pack Wheelers Offroad 3 leaf progressive AAL Wheelers Superbump Front Duro Bump U bolt flip kit Duro Bump progressive bump stop 3rd gen TRD offroad sway bar Wheels and Tires: Summit Racing Wheel Dakars (Polished Silver) 285/70r/17 Goodyear Wrangler Duratrax (Load D) "Performance": AFE CAI with custom powdercoated white filter cover MagnaFlow Performance Series Exhaust URD Cam gears XTP Intake Manifold Spacer OTT Torque Tune Brakes: Stoptech Slotted Rotors TRD ceramic pads Wheelers offroad SS brakelines (Front) Interior: Kenwood DD headunit Oem Subaru Kicker Tweeters Alpine 6x9 (Front) & 6.5 (rear) (With Taco tunes speaker mounts) Alpine 500 watt amp Sound Deadening (Doors, Rear "wall", Roof) ODI Rouge Shift Knob Weather Tech Mats Painted/wrapped trim pieces Console Safe Console Vault Gridx Organizer Ram Phone Mount Meso Customs dual color map lights Meso Customs dual color dome light Wet Okole seat covers (Black) Wet Okole center console cover (Black) 1" Seat Raisers (Driver & Passenger) AJT Designs climate control and 4x4 knobs Back Up Camera Lighting: Retrofits (Mini H1's, RGB Halos, 5500k Bulbs)(Lenses wrapped in self healing PPF) Diode Dynamics SS3 Max SAE (Yellow) Diode Dynamics SS3 Pro (Yellow) Driving lights Anytime fog mod Rigid Industries E series 32" Combo bar (spot/flood) Diode Dynamics XPR Reverse Lights Diode Dynamics XP80 turn signals LED brake, parking lights and license plate lights Armor: Apex All Pro sliders BPF steel skid plate Bigass Trailer Hitch Camping/Storage: Leer canopy LED interior lighting Sleeping platform (Storage underneath) Removable snowboard Yakima mounts Extra D rings in bed (6 total) Custom Powder coated white snow shovel with custom bedrail mounts Amazon special Traction Boards Hi Lift 48" Jack with custom Rail mounts to accommodate my sleeper set up Other: All pro Bed Stiffeners Relentless Fab tailgate panel TRD sport graphics (Turd Gen spec) Anti Sun glare hood scoop wrap (Satin Black) Custom FleeBay grille 4 Hella supertones ECGS needle bearing 4 patches (for now) BPF shackle mount (With smittybuilt shackle) Tinted windows (Front/Rear + Full canopy)(18%) Meso Customs gasshole AVS inchannel window visors Diff Breather Kit 2012-2015 Oem Turn signal/folding mirrors (w/ sequential signals) 2012-2015 Oem LED taillights Full Size (285/70r17) spare DIY Larger Engine Splash Guards DIY Vipercut
    That's sick!
     
    20somethingwidataco, Sep 12, 2018
    #11
    At The Helm[OP] likes this.
  12. Sep 12, 2018 at 1:15 AM
    #12
    TACOVRD

    #12
    TACOVRD I Identify As A Prius

    Joined:
    Jul 11, 2015
    Member:
    #159264
    Messages:
    6,438
    Gender:
    Male
    First Name:
    TW Addict
    AZ/WA
    Vehicle:
    2019 T4R ORP - Formerly 2013 DCSB OR Spruce Mica
    Workin' on it....
    Great looking bumpers!!!
     
    TACOVRD, Sep 12, 2018
    #12
    At The Helm[OP] likes this.
  13. Sep 12, 2018 at 3:18 AM
    #13
    T@co_Pr3runn3r

    #13
    T@co_Pr3runn3r XXXXXXXXXXXXXXXXXXX

    Joined:
    Jan 20, 2009
    Member:
    #12767
    Messages:
    14,580
    Gender:
    Male
    <----------------->
    Vehicle:
    08 RC Prerunner SR5
    I like the unhidden hitch version with the pod cutouts.....................
     
    T@co_Pr3runn3r, Sep 12, 2018
    #13
    At The Helm[OP] and buckhuntin-tacoma like this.
  14. Sep 12, 2018 at 4:09 AM
    #14
    willp07

    #14
    willp07 Don't tread on me

    Joined:
    Jul 14, 2013
    Member:
    #108289
    Messages:
    177
    Gender:
    Male
    First Name:
    Will
    Bay Area, CA
    Vehicle:
    13' DoubleCab Long Bed TRD Sport
    Icon Stage 9 TRD 17" Semas on 285/70/17 Toyos Pelfrey IFS and Mid Skids Pelfrey Aluminum Front Bumper Regeared and ARBs On board Air Snugtop Cap with Yakima tracks Rhino Roof Rack Bedslide When in adventure mode I run an RTT, Fridge and all the stereotypical OAF crap Misc BS mods
    I occasionally tow an enclosed trailer at about 5500lbs. Think this would handle it?

    Very interested in getting one of these if so.
     
    willp07, Sep 12, 2018
    #14
    nx95240 and At The Helm[OP] like this.
  15. Sep 12, 2018 at 6:07 AM
    #15
    Armyhater458

    #15
    Armyhater458 Well-Known Member

    Joined:
    Sep 11, 2017
    Member:
    #229702
    Messages:
    2,596
    Gender:
    Male
    First Name:
    Mike
    Clarion, PA
    Vehicle:
    2012 TX Pro
    OME 887, LR UCA, Dakar 095 (medium duty), Dick Cepek Extreme Country 255/85/16
    Morgan, i just got into the blowout of the bed stiffeners and really liked the quality of the build. If these are built to the same standard you have changed my mind on my rear bumper selection. Also interested in the swing out.
     
    Armyhater458, Sep 12, 2018
    #15
    At The Helm[OP] likes this.
  16. Sep 12, 2018 at 6:48 AM
    #16
    At The Helm

    #16
    At The Helm [OP] ATH Fab Vendor

    Joined:
    Mar 25, 2015
    Member:
    #151787
    Messages:
    1,321
    Gender:
    Male
    First Name:
    Morgan
    Gardnerville, NV
    Vehicle:
    2015 AC 4x4 TRD OR & 2019 T4R
    Kings, TC UCAS, SCS SR8's, ATH bumpers
    Exactly! I’ve always been very careful with this since I started building Jeep bumpers in 2013, and that’s the major reason my selection is limited. My preferred method of taking bumper orders when there is a substantial lead time has always been $100 deposit/ invoice balance when it’s ready to ship. Works great for everyone.

    Thank you! I don’t have an ETA on the HC version or swing outs. I’ll keep everyone up to date though.

    That’s my preferred version too as I tow quite a bit. Easier to insert the hitch and pin.

    My personal bumper is built the same way as these and I have absolutely zero hesitation using it for loads that size. I pull my trailer regularly.

    Yes these are essentially the same build quality. Parts were cut in the same shop I outsource my cutting to, and formed/welded/sanded by me. Stay tuned for tire carriers, might be a while though.
     
    At The Helm, Sep 12, 2018
    #16
    YF_Ryan, seoulja99[QUOTED] and Armyhater458[QUOTED] like this.
  17. Sep 12, 2018 at 6:55 AM
    #17
    motodude95

    #17
    motodude95 Well-Known Member

    Joined:
    May 24, 2017
    Member:
    #219814
    Messages:
    1,305
    Gender:
    Male
    First Name:
    Jim
    Vehicle:
    2012 MGM TRD Sport DCLB, OME 886s, 33s
    These look awesome! Look like they are high quality. I'm not ready to purchase yet but if you have any in stock spring 2019 I will probably be sending you a PM sir
     
    motodude95, Sep 12, 2018
    #17
    At The Helm[OP] likes this.
  18. Sep 12, 2018 at 7:29 AM
    #18
    Sideways1

    #18
    Sideways1 Old Dirt Rider

    Joined:
    May 24, 2015
    Member:
    #155902
    Messages:
    1,214
    Gender:
    Male
    First Name:
    Dan
    Portland Oregon
    Vehicle:
    2015 TRD Sport 4x4 DCLB Pyrite Mica
    ADS 2.5 with Extended travel/ADS 2.5 Piggyback rear. Dakars. Pelfreybilt Aluminum front bumper,Skid and Brute Force Fab HC rear bumper. 5 x SCS Stealth 6's in Matte Bronze wrapped in Nitto Ridge Grapplers. Wet Okole front and rear seat covers. Wilco Bed Rail Tire Carrier. Light Racing Upper Control Arms. Marshall Fabrications sliders with kick out. Mobtown Tailgate Reinforcement Skin. hyper15125 retrofits. And many many odds and ends.
    Do you have a HC in mind yet?

    Be Safe...

    Dan
     
    Sideways1, Sep 12, 2018
    #18
    At The Helm[OP] likes this.
  19. Sep 12, 2018 at 7:32 AM
    #19
    TACOVRD

    #19
    TACOVRD I Identify As A Prius

    Joined:
    Jul 11, 2015
    Member:
    #159264
    Messages:
    6,438
    Gender:
    Male
    First Name:
    TW Addict
    AZ/WA
    Vehicle:
    2019 T4R ORP - Formerly 2013 DCSB OR Spruce Mica
    Workin' on it....
    I’ve got an All-Pro dual swingout which has been great but I’m committed enough now to chop my bedsides off so if and when the time comes that Morgan has a high clearance dual, I will definitely be in the market.
     
    TACOVRD, Sep 12, 2018
    #19
    At The Helm[OP] and Sideways1 like this.
  20. Sep 12, 2018 at 8:24 AM
    #20
    genericTiger

    #20
    genericTiger Active Member

    Joined:
    Jan 18, 2017
    Member:
    #207935
    Messages:
    35
    Orange County, CA
    Vehicle:
    2008 Tacoma TRD Offroad
    Hi, I love the design and fitment of this, is this 3/16" plate all around or are the attachment points / supports the same or thicker gauge?

    I'd be interested in seeing how the the trailer plug relocation is employed in this design, typically I really enjoy designs where the trailer plug cutout is behind the flip down license plate left of the receiver.

    Thanks!
     
    genericTiger, Sep 12, 2018
    #20
    At The Helm[OP] likes this.
Page 1 of 10
To Top