PC3coyote's 2017 Tacoma Build

Your wheels are the 4Runner TRD wheels, is there a part number on those specific wheels?

 

Thanks! Yeah, that's the plan - OME lift + 285s. Still deciding on if I want to do UCAs. The offset of the @SCSPerformance wheels I have should allow me to clear the UCAs hopefully. I'm assuming I'll need to do some trimming and a CMC.

Truck looks great!

Yep! The part number is

$1,025 PTR20-35110-BK (Fits: 4Runner - Tacoma - FJ Cruiser) (4)

PTR20-35110-BK.

 

So, I'm switching things up and have the following for sale!

Short Bed ARE V Series Camper Shell (Blazing Blue Pearl) + Sleeping Platform and Drawer System
located in Hermosa Beach, CA

 

What are you switching to?

 

Bed rack, RTT, and a roof rack. I’ll have more pictures and info soon once I get it all finalized!

 

just did the ignite back up lights on mine, love them... only thing i didnt love was cutting into the metal part on the backside of the bumper to avoid my back up sensors lol came out good and wired up just fine!

 

Looks great! You’ll be really happy with them. It’s great having the extra light when backing up. I also love using them via a switch for camping, perfect amount of light to setup camp when arriving after dark.

 

I just want to give a shoutout to pwalnut! Just purchased a recovery hook from him. It came fast , reasonably priced and very well packaged.
Thanks so much!
Dave

 

Hey, what kind of camera are you using! Your shots look beautiful

 

nice

 

You have a write up for this?

 

Nah I don’t worry. Was such a pain in the ass though. Needed to go down about half an inch and I wouldn’t of needed to cut into the metal bumper brace behind the plastic.

 

Thanks, Dave! I really appreciate that! Enjoy the recovery hook!

Thanks! Most are shot with a Canon 5D Mark III. Some have been with an iPhone either a 7, 8 Plus, or now an XR

Thanks!

I do! Check out this link. Let me know if you have any questions

 

Trip Report
September, 2018
Jawbone and Sequoia National Forest​

 

Trip Report
November, 2018
Joshua Tree​

 

Trip Report
November, 2018
Lone Pine and Death Valley​

 

L O T S O F U P D A T E S ! ! !
OP updated with new photos and info

Removed

• Sold
  • ARE V-series topper with tilt-down front sliding window, fabric headliner, LED battery dome light, black Vantech J-1000 roof rack (custom cut to ~48"), Dakine aero rack pads
  • Custom sleeping platform with full-length powdercoated drawers and three-piece red oak deck
• Was causing crazy radio / steering wheel control issues when offroading so I had to remove in the middle of the night
  • @Logistics91 anytime rear camera kit with plug and play harness and CH4x4 switch
• Tried MBRP exhaust and it's wayyyy too loud and drones on the highway as everyone else says... will remove eventually and put the stock exhaust back on after I cut it axle dump
  • Removed OEM exhaust tip painted satin black
  • Installed (will eventually remove) MBRP T409 stainless steel turndown exhaust

Installed

• @KB Voodoo 10" bed rack
  • Freespirit Recreation High Country Series 55″ Roof Top Tent
  • ARQ4WD 270deg Awning with custom brackets
  • Two 2 gallon Rotopax mounted with Rotopax DLX Pack Mounts
  • Boar Offroad traction boards mounted with @KB Voodoo Max Modular Traction Board Mounts
  • 48" Hi-Lift mounted with Hi-Lift 4XRAC Mounts
• @ProForce Onboard Pressurized Water System
• @mattgecko warm white bed lights
• @zscott / @CBI Offroad Fab Prinsu roof rack - still need to take photos

Went on a few trips

• Jawbone and Sequoia National Forest
• Joshua Tree
• Lone Pine and Death Valley

This weekend I'm installing

• Front suspension
  • OME 886 coils (OME2886)
  • OME 90000 firm struts (OME90000)
  • OME front trim spacer 5mm (OME95PF5) on driver side
  • @HeadStrong Off-Road strut assembly (coil isolators, bushings, washers, and strut mount)
  • @TOTAL CHAOS upper control arms (96504)
  • Cab mount chop
• Rear suspension
  • OME 60091 nitrocharger sport rear shocks (OME60091)
  • OME dakar heavy duty leaf pack (ARBEL096R)
  • OME U-bolts (OMEU53B)
  • OME driveshaft spacer (OMEU53B)
  • @HeadStrong Off-Road leaf spring and shackle bushing kit (FBK05TAC)
• Wheels/tires
  • 17x8.5 4.3" BS -11 @SCSPerformance dark bronze F5 wheels
  • 285/70R17/C BFG All-Terrain T/A KO2 tires

Need to install

• @At The Helm bed stiffeners
• @micwillia bed cubby caps

Coming soon (after black friday deals)

• OEM bed mat
• OEM Pro shift knob with @rrentrop red decals
• Two @KC HiLiTES red Cyclone lights for third brake lights on the bed rack
• Front Runner Outfitters wolf pack storage boxes (4), and stratchits (2)

Anddddd ordered!

• @mesojdm headlight trim plates
• @Bruteforce Fab rear high clearance bumper with light cutouts, swingout, fold-down table, camera relocation box, dual jerry can holder, and powdercoat
• @Bruteforce Fab front plate bumper with light cutouts, hoop with side supports, and powdercoated

 

Dang.. that's quite an update. Looks fantastic. Took about 10 minutes for the page to completly load, but worth it.

Some Q's for you:
- Is the new bed rack the max modular one that KB sells?
- Why a new front bumper from the hybrid one?
- What's the deal with the winch line hooked up ot the jeep? Just playing around, or real recovery?
- I asked a while ago... but are you finding the rock lights are just for fun, or function? I still have them bookmarked from Amazon and plan on putting some in this winter (even have the sticker on my switchpro all set), just curious.
- I think that's the first brackets like that I've seen for your awning. That looks like a cool solution to raise it up on the shorter bedracks (I ahve KB voodoo's hi-rise bars, and figure I'd likely not get an awning). Didn't see that or the awning in your recently installed list.