What Have You Done To Your 2nd Gen Tacoma Today?

I made my own for the same reason. 6 inch length of 7/8 OD pipe and an M8 nut coupler.

 

@Cativelense, I went a little while ago - just got around to posting. Picked up some Julius, Haze, Alter Ego and Green.

 

SWEET!!!!!!!!!!!!!!!!!!!!!!!!!!!!! All crazy good beers. Enjoy!!!!!!!!!!!!!

And come hang out with us beer lovers here:

https://www.tacomaworld.com/threads/the-beer-nerd-what-are-you-drinking-brewing-thread.284717/

 

R those 16s ?

 

Yes sir

 

Dam nice wheels, but lm lookin for 17s

 

Had my brother make me a tray for my external fuse box and breaker. Cleaned up pretty nice.

 

Put one of those Halloween prank arms out the back of my truck under my ARE lid the other day. Then I forgot about it. Scared the scrap out of my self when I threw it into reverse and saw the hand. Thought I hit someone. Yikes.

 

Came up with a solution for my situation. Lifted and bigger tires the stock bottle jack wont do anything for me, a high lift wont help either because I dont have steel bumpers or sliders. So i wanted a way to carry my floor jack but have it secured incase of a rollover and not have it become a projectile. I also wanted to mount in a way where it wont take much room. So this is what I did, I mounted it above my wheel well and on its side. The jack handle is up front with 2 quick fists and brackets I made. The floor jack is mounted with a quick fist around the roller and the rear is secured with bungee cords to a bracket. I added rubber pads where the jack made contact to the bed to avoid rattling noises and scratching the bed. I removed the rear wheels and added all thread in place with nuts on each end to provide a anchor point. Im actually pretty stoked on it because its pretty solid and doesnt move around at all.

 

Hilux 4x4 switch, that I then swapped the stock blue/white LEDs for green.

https://www.tacomaworld.com/threads/machined-ring-for-hilux-lighted-4x4-switch.451738/

 

Where you get them sliders man?

 

Lol I have the set... I’m looking to sell and wanted to know a base price so I’m not selling them for either super cheap or super expensive. Thanks though

 

Are those Bushwackers

 

Looks amazing

 

Thanks for choosing us! Looks great!

 

Over the last week or so installed the lift kit, replaced wheel bearings, got some stt pro's, threw on the mag Mount antenna for my dual band radio and got a full detail inside and out. Cab Mount chop this weekend. Looking pretty good I think for a 2011 with 160000 miles

 

Yeah newer to this site but not to Toyota's. I've had four different mid-eighties pickups another Tacoma and truck before this was a 2000 4Runner that I ran for three hundred and sixty thousand miles. I'd still be driving that but I needed a pick up for work haha

 

Where did you pick up that chase light? I'm just using a simple LED brake light for a motorcycle. Do you have a write up?

 

Nice! I also have an Spod and a Pelfreybilt fuse panel, but I haven't installed the fuse panel. I need to set it up for the Spod. Do you have a pattern you used and would like to share?