Mobtown Offroad 2016+ Toyota Tacoma Front Plate Bumper

Get out

 

Probably looks stupid on a 2nd gen anyway.

 

Like a 3rd gen

 

Thank you for the help @EatSleepTacos for completing the install video.

https://youtu.be/xclWzKwqgn8

 

Hmmm if I didn’t have my sso bumper I’d jump into that aluminum bumper GB!

 

So with the fully loaded front bumper (160lbs) will this cause my stock TRD OR suspension to sag in the front once the bumper is mounted?

 

Once you put a winch in, likely yes.

 

Even without a winch yes. We’re talking North of 100lbs on a tacoma’s fragile front suspension. north of 200lbs with hoops and winch

 

I don't want a winch and already have an expensive 30" light bar in the grill. Would it be possible to make one to fit the light I currently have & have the low profile bar? Also, I have expensive fogs off the Pro model, would these still work? BTW, still love my sliders

 

Is it possible for Mobtown or any other fabrication company to make a rear bumper that incorporates the parking assist sensors on a 2017 Tacoma?

 

With my 730# front springs mine dropped 1/4". So im guess on stock springs maybe an 1" or a little over. But thats just a guess.

 

Is that a 730lb spring?

 

Yes it is lol.

 

Mmmmmmm so sexy

 

That's the heaviest rated sitting I've heard of on one of these. How's the ride? My Pro suspension is handling the weight way better than I expected. Next up is a set of adjustable Kings though.

 

I have Dobinsons MRR with their heaviest spring. They rode great without the bumper, even better with it.
The springs on those are heavier than the offroads arnt they? Ill go king someday as well but im quite happy with what i have now for the price i paid.

 

Shoot if I could respring these Foxes I totally would. Unfortunately, not an option. I think it's only 600.

 

I bet they ride nice with the weight on them tho.

 

Ha they've always been nice but they are especially pillowy!

 

@Mobtown Offroad I have a question about this 3rd Gen Bumper. I have Bilstein 8112 front shocks that have remote reservoirs with a bracket that attaches to the swaybar spacer. This appears to be in the way of the "side strap" from your bumper that attaches to the frame. Is this correct? Would a new side strap that attaches to the next hole back in the frame possibly work? It looks like I would want to run this strap otherwise I would be relying on just the front 6 bolts. Below are a few pictures of my setup. Thanks for the help.