South Carolina BS thread under new MANAGEMENT and lives in SC

The 1F-3F and the 1FZ were also used in industrial applications, i have a mid late 80’s Toyota forklift still rocking a 3F with a Weber 32-36 at a lumber yard in Franklin County. 1FZ was used in Toyota forklifts in early 90’s then replaced by a GM 4.3 because it was shorter and they could shorten the chassis for more maneuverability.

 

Figured you would chime in on that! I knew they were used in some Tractors and stuff like that over seas didn't know they were in industrial equipment here. That engine is a beast for sure. I look like once a week at 80s series just to see what prices are doing. I may pick one up eventually.

 

It's gotta be single row bro

 

Morning

 

I also ordered a 20 and it was too narrow. Ended up using aluminum spacers to get it lined up

 

LED Light Bar with Wiring Harness, OFFROADTOWN 20" 160W Off Road Driving Light Super Slim Combo LED Work Light Bar Fog Lights for Truck ATV UTV Vehicle SUV Ford Boat

https://www.amazon.com/Single-OFFROADTOWN-Lumens-Driving-Off-road/dp/B01N216MYI/ref=mp_s_a_1_7?ie=UTF8&qid=1540980481&sr=8-7&pi=AC_SX236_SY340_QL65&keywords=20+led+light+bar&dpPl=1&dpID=41RUn92Y1jL&ref=plSrch&th=1&psc=1
This is what I ran in mine. Has to be single row.

 

Yeah the one they have is a 100 series but hey the thing still rides like a dream and has room for days compared to the access cab haha. So far they haven't had any problems with it so I hope that still holds true once we get it. I think it's got like 150k on it?

 

Chinese bars are advertised as 20 and they send whatever they got. They ain't got no tape measures in China.

 

The tabs in side to hold the light bar are spaced a extra 1/2" on each side. Because not all 20" bed bars have the same mounting. So a spacer added is better then it being too tight for the bar to even fit.

Or I could be like other companies and make the led bar mounts only fit a $1000 led bar. Maybe I should do that and eliminate the confusion and comprehensio of why one bar fits better then the other

 

Not your fault, China ain't got no quality control. The bar I installed the other day we used 1.5in spacers. Using a spacer ain't no big deal.

 

Morning, folks!

That one looks good. Thanks!

The one I bought was about 3/4 of an inch too long on either side. I'll find another use for it.

 

Seems legit.

 

The 20" might fit under your bedrack with some of those tube clamps.. though it would be some bright af bed lighting.

 

That is exactly what I was thinking, too.

 

Orrrr.. you could find a mount that allows it to rotate about 180 degrees, mount it on the rear bed rack bar, and then you'd have bed lighting once way, rotate it the other and rear scene lighting.

 

I gotta get the mounting hardware for the light since it didn't come in the box, then see if it will bolt up directly to the rack clamps. Just sent the seller a message on Amazon, so we'll see!

 

Mornin y’all. Picked up the ring yesterday and feel stupid broke now. Just have to wait til December to ask her

 

Did the same thing in May. I still feel stupid broke

Best wishes to y'all, it will for sure be worth it.

 

Wait for kids. Then you have 18+ more years of being broke to look forward to!