Speaker adapter

I bought a full set of hertz speakers today but I can't install them without either making adapters from wood or ordering some kinds of already made adapter from internet...

What would be the best solution?
How have you installed your aftermarkets speakers?

 

Up?

 

********* sells a kit

 

Metra makes adapters for both the speakers and the wiring.

$17 82-8146 6" x 9" Front Speaker Adapter for Select Lexus and Toyota Vehicles, Black, Apple

82-8146 for the fronts,

$17 82-8148 6" to 6-3/4" Speaker Adapter for Select Toyota/Lexus/Scion 1998-Up Vehicles, Black

82-8148 for the rears, and

$15 72-8104 Speaker Wire Adapters for Select Toyota Vehicles - 4 Total Adapters

72-8104 for the wiring adapters. You can get the whole set on Amazon for about $35.

Alternatively I think Mr Marv makes adapters for the speakers from birch plywood. Check the vendors section or audio section.

 

I've seen these but for the rear they talk about 6 3/4... Are they good for 6 1/2 !?

 

They are supposed to work for the range of 6 to 6.75, but fair warning there are people on Amazon who say they aren't fitting 2017 Tacoma's.

 

I purchased a set of adapters from Crutchfield Audio when I bought upgraded speakers. I want to say it wasnt anymore than like $35

 

I bought the adapters at Best Buy.

 

Go to crutchfield and double check which adaptors you need. Order from them or source from Amazon

 

If you are good with a router, make some. Don't use MDF though, unless you are going to coat the adapters with some waterproofing paint. Many people on DIY Mobile Audio use the material (polycarbonate) from cutting boards to make their own adapters.

https://www.google.com/search?q=cut...ome..69i57.14725j0j7&sourceid=chrome&ie=UTF-8