33s with 6inch lift, show off your truck

17x9 SCS stealth 6 rims / tires 285/70/17 Goodyear Kevlar MTR

 

Right on. Planning my 6" lift and don't want to be like everyone else and get 33x12.5s on 20s. I like the bigger side wall. Mahalo

 

No worries! If you’re gonna offroad, I feel you. Sidewall is what’s needed especially with lava rock. I have a set of 18x12’s weld Cheyenne’s just to cruise but I’m sooo over it already.

Function > Form

ALL DAY

 

6in BDS lift kit with Fox coilovers
285/75/16 ridge grapplers.

 

16" wheels on a BDS kit? They recommend 18" wheels and 4.5" backspacing. Are you running wheel spacers?

 

That's a solid looking truck.
Same question though. Are the 16s fitting without wheel spacers?

 

Yup exactly.
Are you running wheel spacers with the 17s or do they clear the new spindle?

 

Value added by your post = 0
Why are you even here? You have an obvious distaste for drop brackets...so mosey on back to the overlanding fanboy side.

 

yes, 1 1/4 in spacers

 

thanks, spacers are a must

 

That makes good sense. I suppose that’s the largest 16” tire you can find/fit on a 7” wide wheel.

 

Did they say if a 17 would work?

 

Only with spacers.
BDS demands an 18” wheel with a minimum of 4.5” backspace. Not sure on the specs if you go up to 20”.

 

I never tried fitting 17s but I think with right back spacing might fit. On my 05 taco i had a 6in procomp lift an i ran 17s an it called for 18s or bigger

 

With the SCS 17” wheels I do not need spacers. I was running OEM 4Runner trails prior, and do to the backspacing on that rim, I was required to run wheel spacers. I didn’t feel comfortable with spacers after a while and wanted to save my wheel bearings, which led me to purchasing SCS wheels

 

6in and 33s

 

Just did a little work to my wife's truck for xmas. I hope she likes it.

 

I dig this rig bro! All of the drop bracket hating drives me nuts! I’m getting ready to do the same on my Pro. Semper Fi

 

6” with 35’s

 

Any lift over 3inch =