URD supercharger for 05+ 4 bangers?

Project Taco at LHT Performance, getting a custom exhaust!

 

He purposely left us hanging because he is going to do a full feature on it. I also have the LCE header. The exhaust will consist of 2.5 SS into a high-flow cat to a magnaflow muffler, back half will be ceramic coated black, it's going to be dope!

 

Here is another clip of the truck. Full feature on the exhaust build is coming. Wait till you see it, very surprising!
Start this video at 5:30

 

Much anticipated exhaust build feature, enjoy!

 

What is the part number for the resonator that was installed?

 

Unfortunately they did not provide that for me. The resonator was a last minute change and was not planned for. If you give them a call I'm sure they can provide that
part number for you (727-344-1800).

 

I run this gauge, love it!
https://www.aemelectronics.com/products/gauges/failsafe-gauges/wideband-failsafe-gauge

 

I'm running PLX vac/boost and wideband gauges in a Lotech a-pillar.

The scangauge reads from the OBD2 port, so it can only read what the ECU sees. The stock computer has know way of measuring vacuum or boost pressure.

 

I used something like this to mount my gauge:
https://finebizperformance.co.nz/collections/gauge-holders/products/gband52

 

Santa Claus came early‼️

*Edit* And the Grinch had me sell it‼️

 

AWESOME! I remember mine

 

So I put about more than 10k miles already on my 2tr urd supercharger kit and tested about everything they say in the manual not to do and yes don’t do them lol, like running the fuel down to empty , crappy fuel etc. Also I would not recommend running a K&N filter especially in dusty /sandy areas it will damage your MAF sensor . I just found this out on my return trip from Glamis , all my intake tubes from before the supercharger to the 5th injector was full of dust and had to take everything apart and clean it. Check engine light on all the way home and was burning fuel like crazy. BEFORE you install your kit get your self a good Bluetooth OBD ll scan tool trust me.

Other then that the kit is awesome . Also finally mixed a tank of 91 with VP RACE FUEL and Holy crap does it make a difference .

 

Wow so many waiting for the 2.7l kit including myself. Business for days. Unstoppable off roader can’t wait.

 

What did you have problems with?

 

How's your auto holding up? Mpg still looking good?

 

Auto trans is running like a champ , I have zero issues and mpg is still the same. I Did install the straight pipe to eliminate the second cat like it says on there web page. I don’t recommend this as it thew codes for no cat and would not go away even after resetting the computer . I don’t think the o2 sensor bypass works, infact I don’t think it ever worked for my truck it’s a 2013. I have heard multiple people having the same issue. It did feel better but that could be because the trac control got disabled.

 

You getting a magnuson system for the 2TR-FE?

 

Did they indicate to you what they'd be using for tuning?

 

Dame that’s awesome, if Magnuson comes out with a kit I will be selling my URD kit too. I just replaced my Rotex C30 because it took a shit on me. I just need to stop spending money on these junk superchargers and put a 2UZ motor like I want.

 

how many miles before the rotrex failed?