Glock owners united MEGA THREAD

Understandable.
What about buying a factory slide from eBay or something like that? I've seen a few on there, basically dudes that spend a lot on these aftermarket slides, then sell their factory one. I'm not sure if buying another factory slide then having it milled would be less expensive than just buying one of the aftermarket ones tho.

 

I think you’re putting too much thought into it, and also sounds like you want a MOS.... so get an MOS and have a new Glock for the price of a new slide . Hard to beat

 

Some good information,

https://youtu.be/Z9FTgpEKnPo

 

Thinking on picking up a cheap used 42. Anyone got any input on them

 

The only thing I don't like about mine is the cost of .380 over 9mm.

 

Depends on how cheap, they are freakin tiny and mag capacity of 6 is kinda lame.

 

Some of my tupperware...

 

Anyone use glock plus 2 mag extensions like on the 19x but with the 10 coil spring instead of the 11 and have any issues? (Converting black 17 mags to 19 essentinally) they're cheap from the official glock store (28 for 4 if them) and wouldnt mind the few extra rounds.

 

I carry mine in my pants pocket. It does however wear holes in the pants pocket after a while. But it conceals nicely. Most people think its a wallet.

I found a pro-mag 10rd. That is my only big complaint about it though..is the 6rd factory mags...

 

Finally got up the nerve to take my dremmel to my G19.

 

^ nice. I did the same with my G20 except I don't trust myself with power tools...I took a file and sandpaper to it. I took off the stupid finger groove humps and relieved the under side of the trigger guard. I was hard to get the nerve to do it knowing if I screwed up that was it. Thats the nice part of the sig P320, screw up and you can just buy a new grip frame for like 30 bucks.

 

@Sig10mm my finger groves are next. I probably will use my dremmel on a real low speed to knock out the high spots and then finish it by hand.

 

Anyone interested in this slide for $400?

 

$400 seems a tad high, no?

 

Cerekote job cost $160. I've declined several offers on Ebay for $400 because I'd have to pay 13% in fees.

People have been willing to pay $400 for it, I want to make sure I can pocket $400 to roll into another project

 

That’s cool, good luck with the sale! I didn’t know eBay charged that much, that’s crazy.

 

10% to ebay 3% to paypal...unfortunate

 

Well I did some wheeling and dealing today. I got a new 43x and a 48 on the way. Ordered both with the Ameriglo bold night sights from the factory.

 

My friend let me borrow an unfired G48.
I put 170 rounds through it. Of course, no issues. I won’t be buying one, but only because it would just sit in the safe while I carry a G19 everyday anyway.