What Have You Done To Your 3rd Gen Today?

What now? $20

 

Nope. You might be able to drill one. Don't know if you would need gussting. I'll look tomorrow.

 

I did the same thing with my Rokblokz’s and 285s... just have to finish my CMC

 

Did you get any special deal on it?? I’m looking at the same one...

 

Switched shoes got some Baja Toyota wheels on my sr5 couldnt be happier!

 

Man, I need to get the black headlights. They look SO good.

 

Removed TRD decal from bed of truck and washed and waxed.

 

$11 Etopars 2 X Black Car Plastic Universal Heavy Duty Power Door Lock Actuator 2 Wire 12V

https://www.amazon.com/Etopars-Black-Plastic-Universal-Actuator/dp/B0728K222V

$9 for the actuator, a couple feet of 18 gauge primary wire, 2 T taps, 2 butt connectors, some conduit, a few zip ties and some time. Not hard at all and now I don’t have to stop the engine and take the key out to open the tail gate and my Decked system is going to be secured every time I lock the truck.

 

Finish? Do you mean cutting more or do you mean weld plates?

I cut mine twice, I was conservative the first time then really went at it some months later.

I bought plates but just never had them welded. The CMC would look cleaner but it won't hurt any not having the plates welded.

 

ordering right now... was it plug and play?

 

Added screening spline so the whistling sound would stop....
Front doors on the upper molding.. haven't decided if I'm going to dab some silicone.. seems to stay in place

 

Did a little trail riding today in the NC mountains.

 

HI Lift jack mount installed in the bed with a Carhartt canvas bag for recovery gear.

 

See post 113886

 

Auxbeam lowbeams, amber fog and marker lights

 

I finally pulled the Trigger on some better than stock Tires. went from 265 60 17R to A 245 75 17R and I think they look good it even makes the Stock rims look way better

 

Nice wheels. Get some quality black Gorilla branded lug nuts and they'll really look sharp.

 

Did you have to modify suspension to do this?

 

nope all stock the stock Tire were 265 60 17r (Inches) 30.4 tall and 10.5 wide and the new 245 75 17R is 31.5 tall and 9.6 wide

 

Just finished wiring my power tray, here are several pics of the process.
The reason for this was to wire up new seat heaters and some lighting options.

It all started with this which I picked-up from a TW brother @breader3 Brad was a pleasure to deal with!

Then I bought this from @Mr.PowerTrays B.T.W. Maverick is a great guy to deal with! The Power Tray is awesome!

Planning stage

Final layout and wiring done and ready to install in my Taco