DFW BS Thread : ********NEW MEET!! CHECK POST #1*******

Ead

 

He's out, @ETXTacoma also loves grinding out those rivets

 

I still haven’t installed mine.
@ETXTacoma offered, but seems busy lately.

It might become Tandem’s problem soon.

 

Once I get my bumper, I’ll have two Jerry cans on the back; one fuel one water.

For the water, I’m thinking of adding this for ease of use.
RAINPAL RBS005 Brass Water Container/Rain Barrel Quarter Turn Spigot(Lead Free Compliant)

$15 RAINPAL RBS005 Brass Water Container/Rain Barrel Quarter Turn Spigot(LF Compliant, For OPEN TOP BARRELS)

https://www.amazon.com/dp/B019YMGNDW/ref=cm_sw_r_cp_api_i_JjvBCb3Q5P73X

Have y’all used anything different/better?

@trekker

 

We can make it a hammer hanger party?

 

After seeing @trekker's OBW pressurized setup I ended up getting it for my truck. Pump is in the bed cubby and fittings to connect to it are in the bed. Run pick up tub into any water source with the other end to a quick fitting and enjoy pressurized water. Can even run it to a tankless water propane heater for hot water.
https://www.tacomaworld.com/threads...-2018-toyota-tacoma-obw.453005/#post-13313622

 

That should make life a bit easier. I'm thinking of making PVC tank to stash up under the 4R behind the air tank.

On my truck I use a seaflo pump with a line dropped into one of my jerry cans. I haven't done anything to modify a water can yet, but I like that spigot valve setup.

 

Mhmm. I like your OBW setup.

I want to find a small water pump that can drop into a jerrycan, power with the 110v AC in the bed, and still have enough power to be useful.

 

I bet he does.

Oh you know I do...

@Zac of all trades this was the day we were doing the Hammer Hanger install at your parents place.

If I am not going back out to Purtis Creek to finish my project Saturday, then I will be out there and will bring what tools I have to help.

You haven't given me dates yet that you would want to... are you coming to me or do I need to come to you, how we doing this shindig?

 

This is the 12v 35psi pump that I use on my truck and might get used in the 4r.

$28 Seaflo 12V 1.2 GPM 35 PSI Water Pressure Diaphragm Pump

https://www.amazon.com/dp/B01CIZMC3...colid=FAGKALK9HAEL&psc=0&ref_=lv_ov_lig_dp_it

Let me know what pump you come up with on your search. I've been going back-and-forth on submersible pumps for the next project... especially since the 4R doesn't have a protected area for a pump to reside like the tacoma's bed cubby.

 

I don’t know. Maybe March 23-24.
Problem is I’ll be unavailable for most of April, and a lot of other weekends are booked.

 

I can do that weekend, I have a 5K that morning, but it is right beside the house and I walk to the event area from my house and it starts at like 8am... so I can do that weekend if you want to.

Are you coming to me or am I coming to you though?

 

Could we knock out two, or is that over enthusiastic? Not sure if I work yet but I might be off

 

Ummmmmmmmmmmmmmmmm

That is pretty enthusiastic, it would have to be done one at a time as I would not want to attempt both at the same time, but since both are needing to be done.... would not hurt to be involved and see how its done and what not.

 

Sorry to hear that man. If I don't have to travel Saturday I can try and lend a hand.

 

If you’re willing to travel, come on over.

I’ll feed/house you for the weekend.

 

Agreed, if I'm free I have no problems coming to help out

 

Anyone got some leads on a older toyota say around 2500ish

 

Bump up to 4500 and i got a cpl leads

 

Truck? Or car?