1st Gen Lunchtable Thread - General Discussion

only reason im willing to spend this on the axle is because my parts manager is paying for the steering rack... sooooo makes it easier... still gotta get new lower control arms and ball joints (the left lower control arm is bent... just a hair.. and i have to repair the one cam tab... TC doesnt make cam tab gussets for the tundra.. kinda sucks.. oh well

 

Aren't the gussets the same, I thought they used the same cams

 

How'd you get that lucky?

 

different setup on the cam tabs
its not a seperate plate like the tacos.. its part of the frame itself

 

i fixed his unfix able car..


in 5 minutes

 

I'm gonna need the backstory for this.

 

he had 3 different people try to fix his VSC and ABS.... they replaced the ABS computer, actuator, steering angle sensor, engine computer, and pressure switches



all i needed was calibration.. which is a pain in the ass to do right... but it all calibrated in 5 minutes... done. VSC works again... trucks safe for his daughter

 

Daughter 18? If so good for her

 

huh?

 

Is the daughter 18? God sake boy think

 

well uh.. yes. she is. well past that. going through medical issues with herself and her 4 year old son....

 

Damn that sucks

 

she has some rare disease and wasnt suppose to live to see 3 years old... here she is at 27 with a family now.

 

How much of the people do you know of your town?

 

what?

 

Are you some sort of stalker? I understand the Napa kid but you told me a brief description about 10-12 different people in your town

 

dude i do alot of work for people. im well known in town.

 

Lol I know I'm just giving you a hard time

 

damn son. after all i did. damn.....



i still need to hook up that ARB diff breather to the tundra... trans transfer case and both diffs.. perfect.. since that truck will likely be what sees offroad time

 

Hey dudes

for a 2004 3rz, I am fixing my terrible intake tube from TB to airbox, replacing it with https://www.ebay.com/itm/3-45-Degree-304-Stainless-Steel-Mandrel-Bend-Pipe-Exhaust-Catback-USA16ga/122523716835?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2060353.m2749.l2649 (@boostedka Thank you brosef )

He had a 98 that he built this tube set up for i'm doing an 04. 3 inch to 3 inch hump coupler, tube, then 3 inch to 2.75 coupler. That sound right?

This is somewhat the goal

Although I don't remember seeing the IAC coming off the intake tube in my 04. Seems to be a straight intake tube across on my janky thing now.