1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Need help with putting slip yoke back in!

Discussion in '2nd Gen. Tacomas (2005-2015)' started by 757yotas, Jul 28, 2019.

  1. Jul 28, 2019 at 5:16 PM
    #21
    757yotas

    757yotas [OP] Well-Known Member

    Joined:
    Feb 5, 2015
    Member:
    #147976
    Messages:
    2,109
    Gender:
    Male
    Virginia
    Vehicle:
    2007 TRD Sport
    ICI Magnum front bumer Rigid LED lighting OME lift 285/70 Nitto Exos 17" Fuel Hostage TRD Exhaust TonnauPro Cover Oil Catch Can Tint Pioneer Nav system Sound System LED lighting Euro headlights Paint
    No set maintenance schedule for it from toyota as stated. They call it "non serviceable" so they do not sell anything you need to properly service it. Ford XG-8 grease is what you want to use and you can get it at the local ford dealer for around 12$. I did not have to get a new clamp because I used a flat head to pry to clamped part apart alittle and when I put it back on used wire cutters to tighten the clamped part back on. First time for me is at 130k miles
     

Products Discussed in

To Top