What Have You Done To Your 2nd Gen Tacoma Today?

Subaru tweeters and Rockford Fosgate speakers have been sitting on the dining room table for 2 weeks and not in the truck where they belong. I've been thinking that I should Dynamat the doors at the same time. Is Dynamat that life changing or can I get by without the extra expense and pain in the ass install?

 

Do it worth the extra time and money

 

I'm cheap and lazy, you're supposed to tell me it doesn't matter.

 

I did it all over the inside of my access cab including the inside of all the doors and it made a big difference.

 

Then I’d be lying

 

Fine. There are a couple audio stores in town, I'll have to see if they have anything like that.

 

Do you happen to remember how much you used?

 

Yes, using Dynamat makes a big diff. I did this to my 2005, but I also changed the head unit that had higher output. But this time I was lazy and used BoomMats in my 2015 and stayed with O.E. Head unit. BoomMats help, but not like Dynamat does.

 

use this it's way cheaper than dynamat. Got it on Amazon

 

Added an ARB awning last night, had to take a new pic this morning

 

yeah the cutouts can be used for cups or parts, or anything else. i haven’t decided if i have the time needed to start selling these.

 

Literally night and day difference.

Noico 4 life! way cheaper and its the same shit.

 

what PSI is your sun joe? How do you like it? I see those for pretty inexpensive all the time and always wonder about the quality.

 

Took the day off!

 

I have the Sun Joe SPX3000. Its 2K PSI and I like it alot. Have had it since April of 2017 and with their foam cannon it's a thing of beauty.

Sun Joe SPX3000 Pressure Joe 2030 PSI 1.76 GPM 14.5-Amp Electric Pressure Washer

$169 Sun Joe SPX3000 14.5-Amp Electric High Pressure Washer, Cleans Cars/Fences/Patios, Green

https://www.amazon.com/dp/B00CPGMUXW/ref=cm_sw_r_cp_apa_i_rzJJDb5KDK76X

 

Also looks like you can get one for $116 now through Amazon warehouse deal!

 

Go with @LSC15 they are great

 

When you meet a friend for dinner and the valet is an offroad guy (with a GX), you get rockstar parking with the fancy cars.



Finally got the sliders painted and installed.
Rustoleum spray bedliner is horrible to apply. Used 3 cans, all 3 had intermittent spray issues. They would spray no product then all of a sudden dispense a shitload. As a result I got runs in some areas, too light of an application in others. I am no stranger to spray cans or prepping/painting trail armor, this stuff just sucked to use compared to the VHT chassis and rollbar paint I normally use. I still have to pickup another can to touch up a couple of spots where I wound up too light on product.
Also had to order new hardware from Allpro (err, Trailgear). Found out the PO of my truck skipped installing a fair bit of the hardware, he only installed the ones that didn't require drilling, they weren't bolted on across the bottom at all.
Glad I caught that before I actually used the sliders.

 

1.25” Spidertrax to compensate for the bigger tires.