Step rails question

Will a DB SB steps fit a DC LB? Found some local for very cheap. TIA!

 

I assume they would as I believe the cab part of the SB and LB are the same. I think the difference would be if it is a DC or AC. But, don't go to the bank with my advice...that and $1.00 will buy you a Coke at McDonald's (assuming that special is still available).

 

I ordered steps from the dealer for a DCSB and when I picked them up learned they were for a DCLB, my mistake as I gave them the wrong part #. Anyway, they were longer than the steps I needed and knew right away by the length of the box. Tried one anyway and did not fit. Ordered the right ones and no problems.

 

since the back wheel on a dual cab long bed is farther back there are different mounting points than a dual cab short bed.

 

A dcsb and dclb pre drilled holes are the same. I have a set of predator step bars and they came off a dcsb and went directly into my long bed. They all allign right up and running boards from a 2nd gen will bolt right up as well.

 

looks like they have different part numbers.
Part Number:
PT767-35110 (B-CAB REGULAR BED)
PT767-35111 (C-CAB REGULAR BED)
PT767-35112 (D-CAB SHORT BED)
PT767-35113 (D-CAB LONG BED)
PT767-35120 (C–CAB REGULAR BED) CHROME
PT767-35121 (D-CAB SHORT BED) CHROME
PT767-35122 (D-CAB LONG BED) CHROME

 

Looks like people have done it in the past, though my DCLB tube steps look longer than those in the first link.
https://www.tacomaworld.com/threads/oem-step-tubes-interchangeable-for-dclb-and-dcsb.374608/
https://www.tacomaworld.com/threads/will-these-steps-fit.508447/