Manual trans floor shift assembly diagram

Hi all.

I’m looking for help finding a part.

At the bottom on the shifter (the black rod section) there is a rubber sleeve that has worn out. I’m trying to find a part number but can’t find a detailed diagram.

Can anyone help me out? I’m thinking a more detailed diagram of the floor shift lever assembly might be helpful.

05 4.0L manual trans.

Thanks.

 

Bueller?

 

https://www.marlincrawler.com/shifter-parts/new-heavy-duty-seat-socket-combo

 

I believe 33505-0K010 should work for you, or the Marlin Crawler options listed by MY50 above.

33505-0K010 - Ball Cup/Seat (in shifter housing)

$12 33548-60040 Bush Shift Lever (For Floor Shift)

33548-60040 - Bushing (end of shift lever into transmission)

Jeff

 

Im having the same problem, It's the plastic bushing that disintegrated at the end of the black shaft... I was quoted that the whole shifter would need replacement. Im thinking of going with a hurst for a pretty penny thouogh

 

The bushing is available, part number

$12 33548-60040 Bush Shift Lever (For Floor Shift)

33548-60040.

Jeff

 

this thing vibrates the shifter like crazy. I ran one for less than a week and swapped back to an oem

 

Bingo. That’s the part that busted.

 

You had me all excited there for a second. Not the part that I need. Thanks though!

 

Read my earlier post for the part you need.

Jeff

 

Oh hold on, are you saying you broke the shifter itself? Yeah you can’t replace that. You need the whole shift lever for sure.

Jeff

 

Theres another thread on here where someone mentioned they had epoxied the two back together. That bushing between the two shift levers molded in there around the shaft of the bottom half. Just fill the top half with an epoxy and stick it over the bottom half. You should have the shifter out of the truck when you do that so you can have it upside down. Otherwise epoxy will get all over the place. Not sure what type of epoxy to use.

 

In researching this I saw that @badger posted saying he had made a new rubber bushing.

Maybe he’ll chime in with some wisdom?

 

Ah, your stick bushing gave out.

My old assembly is collecting dust if you're interested... where are you located?

Might still have the urd SS still with it too, will have to check the parts bins.

 

Sent you a pm