Feeler: Modular Multimount Panel – Mounts to Seat Jackers (3rd/2nd Gen)

We have our new Multimount Panel/Accessory Board (still working on the name) about 99% done. We will be listing them for sale very soon with shipping starting 12/16.

Initial batches will be for use with Front Seat Jackers only. We are working on brackets that will allow them to be installed in the front or rear without Seat Jackers. They might be ready for shipping on 12/16 as well. Final Boards/Panels will be powder coated satin black and come with SS hardware (Flat heads to join the boards, button heads to mount them to the Seat Jacker/Bracket).

DDI

 

Looks great!

 

Thanks, we are working on adjusting the non-seat jacker design so that its one piece. As in no extra angle brackets required. Should have some pictures up in the next week.

 

Sub'd... I'm in for one as long as it's an affordable price. I would like to mount my Fire Extinguisher and flash light on it.

Nice concept!

 

Good to hear. These are perfect for a Fire Extinguisher and Flash Light. I was even thinking this would be a good place to mount a small tool roll/pouch.


The Accessory Board materiel has arrived and is going into production today with a goal to start shipping next weekend.

The hole/slot spacing was designed to fit:

• Any size Mag Lite mount
• 3 different sizes of Quick Fists
• Several types of fire extinguisher mounts
• Several gun holsters
• Rare earth magnet mounts
• Option to use velco or nylon straps
• And of course you can drill your own holes for custom attachments

We will offer in Raw Aluminium or Satin Black powder coat. Depending on raw or powder coat, the final cost will be around $55 shipped for TacomaWorld members. This is for the Seat Jacker mountable Accessory Boards only. The Accessory Boards that require the 90 degree mounting tab for use in the rear or without the front Seat Jackers will be a bit more to account for extra materiel and shop time.

Thanks,
Steve
https://desertdoesit.com/

 

The Multimount Panels are done and ready for sale. Use code TacomaWorld1 to save 10%.

DesertDoesIt.com

 

I like it but I need the non-riser version. How soon will you be producing those?

Thanks, -Brett

 

Think about rolling the slotted section of the front facing mounts 90* back to lay flat on the raised section of floor pan. Would there be enough room for something useful to be mounted there? If so, it would be 'under' the front seat and wouldn't interfere with drivers that like to pull their foot/feet back.

 

The non-seat jacker version should be available in the next few weeks.

We thought about that but the material, machine operations, and shop time would push the price well above $100. Plus you wouldn't gain a whole lot of use able space considering the seat adjuster bar is right there. That's assuming i'm understanding you correctly.

 

The Seat Jacker version is done and ready to ship. Thank you TacomaWorld for all your input and support.

The non seat Jacker version will be ready to ship late January.

https://desertdoesit.com/

 

We switched gears on the front Multi-Mount Panel (MMP) decided to use brackets that mount on top of the seat frame. These do not require the Seat Jackers.

The rears still slide under (one piece).

Should have powder coated stock ready to ship in the next week or two tops.

 

Will the Multi-Mount Panel and bolt bracket work on your original seat jacker without the bolt holes in the front.
Will it fit down in the Channel and clear the seat adjuster ?

 

Good question, it will fit and clearances will match those that install the brackets only without Seat Jackers.

Here are a couple early pics from the original prototype.



Link to FS post

 

Awesome thanks for the fast reply. And will definitely be getting one soon.

 

@adv_built on Instagram has a pretty slick setup on our MMP.



New V2 honeycomb one piece design started selling last month.

 

You asked for it, our biggest public sale ever. 15% off site wide now through 12/01.

Use coupon code BFCM2020

DesertDoesIt.com