Any way to use the "Small" Traction Control switch in the "Large" blank?

I have a 2020 Access Cab and I'm looking to add the SDHQ Switch Pro Panel. Unfortunately as you can see, I need to relo my traction control switch a blank spot on the bottom of the panel and I only have the "large" blank left over.

SDHQ is having their engineers look into this, but.... Wondering if there is a solution like a "Large " TC button that will work properly in the new Tacoma.

Thanks in advance for any insight.

Cheers~

John

 

I’ve swapped switches before. Just unplug from one to the other as long as they are the same pin configuration.

edit: use cannot use the blank. You will need to order a new large button for that slot

 

Dang they moved the Trac button there and got rid of the cubby? And didn't even center the switches lol.

Could you move it back up to the overhead where the map lights are?

 

Nope - That's where the "Toyota" connect button is...

Probably the easiest is just to not install the Auto Headlights and use that spot.. I've tried them in the Land Cruiser and didnt like them, so I doubt I'll even use that switch.

I'm sure SDHQ will update the panel, but I'm ready to start the electrical mods and really can't wait months. I was just wondering if the Gen 2 Taco switch is the same pinout and plug as I believe it was the taller switch.

Thanks,

J

 

https://www.aironboard.com/online/push-switch-833b-12volt-toyota-oem-replacement-traction-blue.html

Ea$y Pea$y.

 

How'd your AC get the cab light? This is what I've got...2020 AC 6MT. Trying to figure out the same as you, probably going to rely on MESO to make me a panel.

 

I can do that

 

Any overhead panels in there?

 

That was from last batch when I took special request orders. But ya, too right you can see some 3rd gen overhead. Top middle is 2nd gen overhead

 

How many switches can you get up there without mods? If 4, I’m interested.

 

Without mods? ya prob 4

 

How do I get one of them there thingies? Shapeways has a set of left/center/right, but I’d rather build my karma with you. Can you do a single span that holds 4 without requiring mods?

 

Or just the center for 2 for now.

 

I know! Open up (the orders) big boy!

 

Would a traction control from a FJ cruiser work? I assume same pin layout and they are the old longer size.

 

I see my order in the second row. Great job Stew! Fits like a glove.

 

I need one for a auxbeam 8 gang with 3 small on bottom and the long light switch. You still making them? How much?