What Have You Done To Your 2nd Gen Tacoma Today?

What brand are your window louvers?

 

That's a sweet looking rack. Can't find it on their website, is it an older one?

 

Weathertech I believe

 

It’s not common that’s for sure. When the light hits it right it’s amazing!!

 

Gave it a bath.

 

Changed oil and filter, air filter, cleaned catch can, cleaned MAF

 

You need an $8 jumper. See this thread. https://www.tacomaworld.com/threads/diode-dynamics-smart-tap-cf18-relay.471753/page-5

 

I had my center console painted by a body shop black then I scratched the shit out of it so I decided fuck it bed liner it is

 

I finally installed my 3rd gen off road suspension I bought a few months ago. I was more worried about doing the front than the rear, but the fronts went super smooth. Sway bar link bolts were spinning, but vice grips took care of that. I spent more time trying to figure out how to keep the rear shocks from spinning while losening/tightening the top nuts. vice grips ended up working on the left side, but had to grind a couple flat spots on right side to keep the shaft from spinning in the vice grips. I tried a torch first, but when the rubber isolators caught fire, I figured I should try something else. I ended gaining an inch in the front, and nothing out back. Was hoping for a little bit more, but I’ll take what I can get.

 

yeah the inlet goes down about 2/3 of the way with a pipe. the top is removable so you can put either scotch brite or something else in it to catch oil vapors and replace and clean it every once in a while. doesn't have a gasket so you will have to use rtv to seal the top.

 

Nice! Pictures?

 

Toyoda decal

 

Thanks, I will look into it.

 

I think it looks pretty cool white...I had a white topper with Blue R.M. truck for a while, not bad but I color matched too. Sharp!

 

Finally got around to installing my camping lights as well as installing some Baja S2 sports. Still want to get some s1 for ditch lights when budget allows. Very happy with how the lights turned out! Out put on both is better than i expected!

 

That's one mean stance. Love it!

 

No more blocks!
Thanks to @Desert Dog for hooking it up with the full leaf set.

 

Recommend you get extended brake lines. Looks like you are running out of slack.

 

Extended brake lines and super bumps.. I can't tell you how plush my ride is with the bumpstops.

 

What is the bs and off set of your wheels? Stock UCA? and do you rub or have a cmc?