NW WA Meet / BS Thread

Don’t wanna be banned. (But yes I grabbed a couple cheap shots past the husbands nose from the passenger seat.

See above.

Yup, don’t wanna piss off the powers that be.

Eh. They’re funny, nothing worthy of a pm.

Weenie wagers. Now dats nasty.

 

That’s a tiddy stand lol

 

She shouldn't have told you where she works then.

 

They are aluminum. The first pic is a broken concave washer. There's two that oppose each other, @JimSnell and I think act as a lock washer that when force is pressed against them they push back creating a locking effect.

Or maybe some sort of flow diversion before the oil hits the valve shims on rebound?

:Edit: ahhh they're "topout washers"

Heres the other shock internals, no Carnage in it, and it had the shorter spacer. You can see the 2 washers.

 

When I used to pump Porta potties, driving 200+ miles a day between 3 different counties, I'd hit 2 or 3 of those a day and on a couple occasions 4 or 5, from Tacoma to Tukwilla/SeaTac and Renton. One day my boss asked if he was missing out on anything, I looked at him with a confused look on my face and he said "I know where you get coffee, I have gps on the truck". after that we would send pins to each other during the week of different ones, up and down the I-5 corridor. There must be over 50 BB's on 99 alone stretching from Federal way/Puyallup to Marysville. Or so I've heard....

 

Ahh I see they are Al now. And I just realized coilovers (I was thinking just smooth bodies). So makes a bunch more sense now (and I am also much more awake then when i first saw it lol).

 

Is your buddy one of those detectives who spent a year of undercover work gathering "evidence" at bikini barista stands? lol.

 

Wait... so you didn't realize what you were rolling up to? I've always wondered if that happened to people from out of town.

 

the first time (a few years ago) while, surprised, I’m not offended in the least. just didn’t think of it this time since it was near freezing and 2’ of snow on the ground.

 

I was pulling out of the Tacoma Screw in Kent this summer and looked left to pull into traffic. The bare ass i saw though the door to the ladybug in the parking lot froze my brain for about ten seconds until i figured out why i was seeing what i was seeing.

 

Until you realized it was a homeless man that broke in.

 

He had the ass of a ten year old boy

 

not really my jam.

 

Bruh

Mobil-1 5w-30 quart containers screw into the filler neck

​

 

There was something else I found that did that too.. maybe it was at work I can't remember now.

 

very impressed with stock bumper strength. dummy superintendant backed in to the front of my truck in a silverado. bent my license plate. his bumper bent enough his tailgate wouldnt close after he yanked it open. ha! makes me want armor all the more.

 

Or a slut hut if you enjoy rhyming...

 

Hey Folks,

Any advice?

Truck's electrical started going haywire yesterday:

- Outside temp malfunction
- Trac control / LSD flashes on and off a few times

Today:

- Outside temp -> same
- Trac control / LSD -> flashing more frequently
- High beams turned on when I got home and would not shut off. Had to disconnect the battery.

I'll keep the battery disconnected over night and check things in the morning. I'm worried if things seem normal, that it'll start acting up once on the road. Leaning heavily toward taking into a shop / Toyota of Seattle...

 

shop if you can is best. self help. check battery cable health both positive and ground. look for water getting around electral locations. engine to cab wiring pass through for water wicking. look for the obvious signs but dealer or pro shop might be a wise choice.

 

id say its a water issue at a major location. multiple functions going haywire would suggest that.