What Have You Done To Your 3rd Gen Today?

Yea that may be the next mod on the list

 

I'm sure he was a good man

Where'd you get the push button switch and where do you install it?

Bed stiffeners are Total Chaos, love em.

 

Started out the day by getting some new shoes 265/75/16 ko2s on method 701s no rubbing with stock or suspension.
than got home and was hyping out on the truck so started the install of my PowerTrays
Than decided I better install my mattgecko leds So that I could see while I finish hooking up the switch pro and my ham radio

 

Where did you get the power tray? It looks nice!

 

Does this just delete the two rear cats? Does this act as a reroute also to tuck the pipe up?

 

thanks! got it during @powertrays Black Friday sale. It is the new vertical switch pro PowerTrays. I painted it green

 

Thanks man! It would probably look even cleaner if my truck wasn't so damn dirty right now.

Those are total chaos bed stiffeners and they are great.

TACOMA REAR CHANNEL BED STIFFENERS (2016+)

https://www.amazon.com/TACOMA-REAR-CHANNEL-STIFFENERS-2016/dp/B01MQEGMHJ

The shovel and traction board mounts are just something I fabbed up. Used some flat steel from home depot, some 3/8" allen bolts, and some of these T nuts.

T Slot Nuts (4 Pack), T Slot Nut for Toyota Tundra & Toyota Tacoma Pick-Up Truck Bed Deck Rails Accessories & Tie Down, Fits Screws with 3/8"-16 Thread.

https://www.amazon.com/gp/product/B073ZN63BH/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
The boards are held on to the steel by some long 1/4" bolts and these

Innovative Components - AN4C----5S2--21 AN4C-5S221 1.38" Star knob thru hole 1/4-20 steel zinc insert black pp (Pack of 10)

https://www.amazon.com/gp/product/B00GORWKB0/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

 

Here's the switch I used. Had to cut it down super short to be able to fit between the bed and the tailgate.

$3 Nickel Plated Pin Switch w/Polycarb Plunger and Rubber Boot

https://www.amazon.com/gp/product/B001TQPM6Q/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

The bed stiffeners rock! Love the additional tie down points, which have already come in handy.

 

Negative. Cotton rags, and chemical guys invisible cleaner and dressing

 

Yeah I can't quite picture where you'd put it that would allow it to activate and deactivate on its own. Could you post a pic? I've been looking for a clean way to do bed lighting for a while and this is a great idea .

Definitely best stiffeners around. I like that they go all the way up the side. Adds that extra bit of reinforcement the others don't.

 

Anyone know a good aftermarket skid plate for a 2WD? I wanted the RCI skid plate, but it’s only for 4WD.

 

Here you go: Quick Charge 3.0 Car Charger,...

$21 Quick Charge 3.0 Car Charger, CHGeek 12V/24V 36W Waterproof Aluminium Dual QC3.0 USB Fast Charger Socket Power Outlet with LED Digital Voltmeter for Marine, Boat, Motorcycle, Truck, Golf Cart and More

https://www.amazon.com/dp/B07GKK9HZT?ref=ppx_pop_mob_ap_share

Just remove the console (2 bolts on the bottom) and the shift/e-brake panel and tap into the lines for the outlet in the console. Drill a hole in the back, install, reattach the panels. Bam.

 

Building out this slider storage system, put together some of the modular boxes this week to fit the needs of any given outing. Clamps are too tall for a sleeping platform so have to go smaller on those. Stoked to finally be back in a Tacoma after many many years

 

Who did you order the tent from, dimensions and cost? Thanks

 

Welcome to TW Bud!

 

Mounted a small fire extinguisher to my Desert Does It molle panel under my driver’s seat. Fits perfectly. Ordering another for the passenger seat for a flashlight.

 

MGM chrome delete and amazing Titanium Shift Knob by our own 7r41lbr34k3r. Soo happy with both.

 

Replaced the map, vanity, and dome lights with LEDs. Big difference.

 

I ended up not drilling into the A pillar. Instead I used VHB tape instead, we’ll see how long it holds

 

Nice! I hope you have diff breathers.