BAMF 2nd gen Hybrid front bumper

Hybrid bumpers seem to be all the rage today. Just about every company making bumpers for Tacomas has a Hybrid option.

BAMF may be late to the game on Hybrids but we will have the best looking, best fitting, strongest and the lowest priced Hybrid on the market.

We took our center section to the next level with perfectly placed 1.75" DOM to give your truck that aggressive look you have been going for.

Bumper Specs:

• Same bullet proof center as our plate bumpers
• 1/4" winch mounting plate with internal gusseting for 8 to 12k winches
• 3/16th Outer skin
• Recessed winch fair-lead mount
• 3/4" SSAB USA plate Recovery points tied 4" into the winch plate
• 1.75"x.120 DOM outer wings capped with 11 gauge caps and gussets
• 30" light bar mount
• up to 6 fog / driving lights can be mounted
• comes standard with the strongest clamping system on the market for worry free winching.
• Weight for the bumper is roughly 110lbs no hoop 125lbs with hoop. plus the hardware and brackets.

Now for the best part the Hybrids on the market are priced as high or higher than the plate bumpers that take much more work to produce. Were not doing that! pricing on our bumper will be will below whats on the market currently. They are faster, cheaper and better something that's unheard of in today's age.

So who's ready for a BAMF Hybrid?

https://bayareametalfab.3dcartstores.com/2012-to-2015-Tacoma-front-Hybrid-bumper_p_155.html









We were not a fan of the empty dead tube hanging on the end of just about every Hybrid bumper on the market. So with much trial and error with the compound bend/copes we landed the lower tube as far back as possible. Without risking tire contact with larger tires, and a massive cope angle at the end of the tube. Providing the best side profile of anything I've seen today.
(Note) the picture below is the bumper raised to the top with less than a 1/8" gap we recommend 3/8th to 1/2" gap if taken off road to allow for body/frame flex.






The light tabs will except up to a 3/8th bolt in the two slots for 3" cube lights and a 1/4" bolt on the ends for single LED like the @Baja Designs S1 shown in the pictures

 

?Man, I was really wanting a plate bumper but for that price im definitely wanting one of these. What will the center hoop look like

 

Looks awesome! You're killin' it Jerry.

 

I know right! it's sexy it will have the same center hoop as our plate bumpers the side triangle tubes will be 1".

 

Any chance there will be a 05-11 version in the future? Been looking at C4's but I like your style, would way rather come down to the Bay to get one.

 

When your late to the game you have to be better right!? I didn't have to price them less but what fun is that

 

It's up on the site I wont have pictures of it until next month 05 to 11 centers are in mid production, but it's the same as the 12 to 15 but with a flat top to flow with the grille.

https://bayareametalfab.3dcartstores.com/2005-to-2011-Tacoma-front-Hybrid-bumper_p_156.html

 

Now that's a clean setup!

 

I want one and I don't even own a 2nd gen!

 

SO GOOD Jerry! Get that 3rd gen rolling and I'll order two for the upTOP Trucks

 

Already on it trying the juggle that with the HC rears and everything else good problems

 

i have one of those coming my way as is. you're killing it jerry, but we feel your pain.

 

Just what I was looking for.. aaaaaaaaaand ordered

 

Thanks for the order

 

If only I could justify throwing the rear in right now. Is there any pics of it yet? HC with swingout (2nd gen)

 

Yes but not 100% compete photos. I'm hoping to coat @Anderson this weekend or early next week. https://bayareametalfab.3dcartstore...earance-Rear-Bumper-Dual-Swing-out_p_149.html

 

Sexy!!!

 

We think so as well thanks.

 

Pelfrey delete

 

Looks great, Jerry!