What Have You Done To Your 2nd Gen Tacoma Today?

What sort of grease did you use? Mine squeak pretty bad, drives me nuts..

 

How do you get that panel out? I need to do the same.

 

Couldn’t find a set answer on what to use. So I picked up some of the original ES grease, Energy Suspension 9.11104 8 Ounce 8 OZ TUB OF FORMULA 5 PRELUBE

$14 Energy Suspension - 9.11104 8 OZ TUB OF FORMULA 5 PRELUBE

https://www.amazon.com/dp/B000MW5SJ4/ref=cm_sw_r_cp_api_i_mTcyEbZJ8Y9TE

So far so good but I’m sure they will squeak again soon. I used to pressure wash them/fluid film them after and it worked for a few weeks. As soon as the anti squeak pads dry out they are screwed lol

 

Right on, thanks for the reply. Let us know how it works out in the long run. Seems like this is a common enough issue that there would be a set way to resolve it by now.. lol

 

I replaced the front brake pads today...
The Toyota engineer who designed this rocks...

My tools were:
Two flat head screwdrivers (for prying the old pads open)
Synthetic brake grease
21mm socket (lug nuts)
Breaker bar (wheel off)
Torque wrench (wheel on)

I've done brakes, this is just too easy...BTW 46k on OEM pads, 70% town, 30% highway

 

I’ve heard it all. I bought the dorman replacements and they didn’t fit.. I’ve see some people put spare tire tube in between too. The key is to keep them clean it seems. Even when I just pressure washed them, the sound was greatly reduced.

 

Glad it was easy! It must be from the town portion of your driving, I do a lot of highway, but I have 82k right now and the stock pads are still at about 30% or so.

 

Painted my sliders, skids and rear bumper all willy nilly and it looks much better. I say all willy nilly because I didn’t mask a single thing off. Just held up a piece of cardboard and blasted away. WD 40 took off any over spray.

 

Dropped it off at dealership for frame inspection. May get a new frame out of it

 

I live near the beach. My Dakars starting squeaking on the passenger side, so I hosed them down with the garden hose pistol. Worked for a few days. Then the squeak came back on the passenger side only, again. I realized it is the side facing the beach and the wind. Looked closer and I could see grains of sand between the leafs. I picked up some of this:

$7 WD-40 Specialist White Lithium Grease Spray with SMART STRAW SPRAYS 2 WAYS, 10 OZ

https://www.amazon.com/dp/B00L35DAWQ/ref=cm_sw_em_r_mt_dp_U_dcdyEbJT9C0PB
No more squeak for 2-3 months, and very simple to occasionally apply from beneath the truck. The spray liquid becomes thicker grease after application. I got the idea from someone else here.

 

Good idea! Thanks! I can deal with a 2-3 month window..

 

just replaced my hard cover bed with a retraxone mx , but now i read reviews it does not keep rain out of the bed. is that true?

 

Awesome. I’m at 90K, mostly highway. Bought mine at 30K. As far as I know there original unless the dealer changed them when I bought the truck.

 

Looks good. Reminds me I need to do mine.

 

I took the VIN to the dealer today and made an appointment to have the frame inspected.
I'm having it done Friday afternoon. Dealer said it will take about an hour.

 

Mine’s been there since 8am this morning. They said since their computer systems were down it may not be till tomorrow till they can get it done

 

Had the truck leveled out today.

 

I know the feeling. I also started with a bed cover then upgraded to a camper shell. With all the stuff i carry for the kids, it was just easy to toss things in the bed with a camper without having to play tetris..lol

 

Something I've always wanted to do. An on-demand front facing camera for self-spotting obstacles. The gridlines are adjusted to line up with my tires at least in the red and yellow zones. Camera mounted to bumper just above the winch fairlead

 

What are you using for the fender flare holes? I ripped all mine a long time ago then just drilled holes and carriage bolts through them to re attach but yours looks way cleaner than mine without them.