1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Ball joints

Discussion in '1st Gen. Tacomas (1995-2004)' started by Cleeh24, Mar 10, 2020.

  1. Mar 11, 2020 at 12:02 PM
    #41
    03_taco_IN

    03_taco_IN Well-Known Member

    Joined:
    Sep 29, 2018
    Member:
    #267850
    Messages:
    209
    Gender:
    Male
    Indiana
    Vehicle:
    2003 xtracab sr5 v6 trd
    Blue wire/ grey wire/rear diff breather mod/881s w/bilistein
    I live in the rust belt so I'm just hoping mine come out in one piece, didn't think about breaking them trying to reinstall lol thanks guys.
     
    High Noon and cruiserguy like this.
  2. Mar 11, 2020 at 12:24 PM
    #42
    Digiratus

    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,042
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Magnuson MP62 Supercharger w/2.37" Pulley Haltech Elite 2000 Standalone ECU Denso 650cc Fuel Injectors Doug Thorley Headers Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit Magnaflow Hi-Flow CAT, Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers Braided Steel Brake Lines ScanGauge II OBDII Scanner Kenwood TM-71A Dual Band Ham Radio Larson 70CM/2M Antenna Uniden 520xl CB radio 3' Firestik Adjustable tip antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    Why do you insist on repeating and spreading this mis-information. Was this your personal experience where 2 of your 4 bolts were a different length?

    It simply is not true and never has been. Yes, there are flanged bolts for pre- '01 1st gen 6 luggers which come with the ball joints and there are bolts with captured washers for the '01-'04 Tacomas that do not come with the ball joints, but in both situations, the bolts for these applications are the same length. Not 2 shorter and 2 longer.

    I see you posting in a lot of threads trying to be helpful. That is great as long as you aren't contributing wrong info. Be certain of what you recommend to those with less experience because wrong info is worse than no info.
     
  3. Mar 11, 2020 at 12:40 PM
    #43
    Digiratus

    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,042
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Magnuson MP62 Supercharger w/2.37" Pulley Haltech Elite 2000 Standalone ECU Denso 650cc Fuel Injectors Doug Thorley Headers Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit Magnaflow Hi-Flow CAT, Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers Braided Steel Brake Lines ScanGauge II OBDII Scanner Kenwood TM-71A Dual Band Ham Radio Larson 70CM/2M Antenna Uniden 520xl CB radio 3' Firestik Adjustable tip antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    Here are the part numbers I use for my '02 6 lug 4x4 Tacoma.

    Passenger side (RH) 43330-39556

    Driver side (LH) 43340-39436

    The parts lookup tool I use is based on the vin# for my truck. It says the part you listed for the driver side BJ will not fit my truck.
     
  4. Mar 11, 2020 at 1:05 PM
    #44
    eon_blue

    eon_blue Most Improved Member

    Joined:
    Mar 4, 2016
    Member:
    #180213
    Messages:
    66,904
    Gender:
    Male
    First Name:
    Ryan
    Vehicle:
    '04 TRD 3.4l 4x4 5sp manual Xtraca & '96 4runner 4x4 5spd manual
    I always use the site partsouq.com to verify part numbers...just type in your VIN and it'll show you the exact part #'s you need for it.
     
  5. Mar 11, 2020 at 2:47 PM
    #45
    OG_Tacoma

    OG_Tacoma Well-Known Member

    Joined:
    Nov 8, 2018
    Member:
    #272074
    Messages:
    2,194
    Gender:
    Male
    What was your process for cleaning the threads in the bolt holes?
     
  6. Mar 11, 2020 at 2:49 PM
    #46
    eon_blue

    eon_blue Most Improved Member

    Joined:
    Mar 4, 2016
    Member:
    #180213
    Messages:
    66,904
    Gender:
    Male
    First Name:
    Ryan
    Vehicle:
    '04 TRD 3.4l 4x4 5sp manual Xtraca & '96 4runner 4x4 5spd manual
    I would probably just spray some brake cleaner up there and stick one of those bristle brushes up inside it and turn it around a few times

    tube_maunally-operated-nylon-tube-brush.jpg
     
    High Noon likes this.
  7. Mar 11, 2020 at 2:51 PM
    #47
    Dirty Pool

    Dirty Pool FLIES ON THE FRIES, KETCHUPS WATERED DOWN

    Joined:
    Mar 24, 2013
    Member:
    #100471
    Messages:
    2,266
    Gender:
    Male
    59.4 Miles, 56.67° NE Of Moab
    Vehicle:
    99 XCAB V6 MT TRD
    Dirty Pool rear bumper/air tank with integrated spare CV shaft storage, DP customized TJM front bumper, 8000 lb Ramsey/Technora rope, E-locked, Extended breathers with front diff catch can, PCV catch can, SAWs with DP heim joint seals, DP custom 6 leaf rear springs/Billies, DP custom skids, 2lo, Gray wire, Cap, Bed Rug, Black steelies, 01 Center console, Map lights, Disraeli gears
    Many moons ago Toyota supplied these. No joke. Now they are all the same length.
    [​IMG]
     
    cruiserguy and Digiratus[QUOTED] like this.
  8. Mar 11, 2020 at 3:13 PM
    #48
    Digiratus

    Digiratus Adventurer

    Joined:
    Mar 26, 2010
    Member:
    #34006
    Messages:
    23,042
    Gender:
    Male
    First Name:
    Mike
    Roaming the PNW
    Vehicle:
    The RedHead
    2002 XtraCab TRD 4x4 SCv6 AutoTrans With Lots of Mods ADS COs w/Compression Adjusters Camburg Uniball UCAs Whiteline Lower Control Arm Bushings Kartek 7" Limit Straps Plastics Guy Front Bumpstops Custom Alcan Springs +800 lbs +3" ADS 10" Stroke Triple Bypass w/Resi Rear Shocks Custom Rear Shock Relocate All-Pro U-bolt Flip w/Timbren Bumpstops 4.88 Nitro Gears ARB Front Locker ARB Twin Compressor Black 17x8 Konig Countersteer Type X 285/70r17 Falken A/T3w Gunmetal 16x8 SCS Ray10s 255/85r16 Maxxis Bighorns Limited Edition (Relentless) Elite Front Bumper Smittybilt X2O 10K Winch Diode Dynamics SS3 Sport Selective Yellow Fog Lights in the Bumper Diode Dynamics SS3 Pro 4,000 Kelvin SAE Driving Lights with Clear Lenses on the Bumper Morimoto D2S Projectors XB35 Ballasts + 4300K Bulbs Badland Sliders FrankenFab Tire Carrier Swingout bumper w/kitchen BudBuilt Front & Bellypan Skids BAMF Rear Diff Skid Dometic CFX 55im Fridge/Freezer Alpha II Hardshell RTT Badland Custom Bed Rack Denso 210-0461 105 amp alternator Dual Northstar 24F AGM batteries BlueSea 7622 ML-ACR Battery controller Peak DBI Dual Battery Voltage Monitor Magnuson MP62 Supercharger w/2.37" Pulley Haltech Elite 2000 Standalone ECU Denso 650cc Fuel Injectors Doug Thorley Headers Aeromotive Stealth 340 Fuel Pump TransGo A340F Reprogramming Shift Kit Magnaflow Hi-Flow CAT, Magnaflow 18" Muffler w/Vibrant Resonator 13WL Brake Calipers Braided Steel Brake Lines ScanGauge II OBDII Scanner Kenwood TM-71A Dual Band Ham Radio Larson 70CM/2M Antenna Uniden 520xl CB radio 3' Firestik Adjustable tip antenna Pioneer DEH-P9400BH HU Alpine Amps & Type R components (F) and coaxials (R) Wet Okole Seat Covers Weathertech Digital Liners Deck Plate Mod 1" Diff Drop Carrier Bearing Drop
    Ah, Interesting. How many moons ago? Like pre-'95.5?
     
  9. Mar 11, 2020 at 3:29 PM
    #49
    Dirty Pool

    Dirty Pool FLIES ON THE FRIES, KETCHUPS WATERED DOWN

    Joined:
    Mar 24, 2013
    Member:
    #100471
    Messages:
    2,266
    Gender:
    Male
    59.4 Miles, 56.67° NE Of Moab
    Vehicle:
    99 XCAB V6 MT TRD
    Dirty Pool rear bumper/air tank with integrated spare CV shaft storage, DP customized TJM front bumper, 8000 lb Ramsey/Technora rope, E-locked, Extended breathers with front diff catch can, PCV catch can, SAWs with DP heim joint seals, DP custom 6 leaf rear springs/Billies, DP custom skids, 2lo, Gray wire, Cap, Bed Rug, Black steelies, 01 Center console, Map lights, Disraeli gears
    No, 1st gens. At least some years in the late 90's had them from the factory and the service replacement LBJ's had them in the hardware pack around 01-02ish for the "non shroud" joints.
     
    cruiserguy likes this.
  10. Mar 11, 2020 at 3:52 PM
    #50
    cruiserguy

    cruiserguy Well-Known Member

    Joined:
    Jul 31, 2016
    Member:
    #193416
    Messages:
    18,924
    Gender:
    Male
    First Name:
    Elijah
    SLC
    Vehicle:
    2000 ext cab, 2.7L, auto, 4x4
    Thanks for clarifying the bolts lengths issue. I do not insist on spreading misinformation intentionally. I do not have personal experience with the different bolts. The info I share without experience comes from here on the forum as I read others experiences. There has obviously been misunderstanding on those experiences regarding these bolt lengths. And fortunately I think I only shared the misinformation of the 2 lengths of bolts in one ball joint 3 times, and that includes today. :D thanks again for clarifying this
     
    Digiratus[QUOTED] and High Noon like this.
  11. Mar 12, 2020 at 9:13 AM
    #51
    2002Tacoma4x4

    2002Tacoma4x4 TRD 4x4 double cab

    Joined:
    Dec 20, 2014
    Member:
    #144634
    Messages:
    1,043
    Gender:
    Male
    First Name:
    C K
    Vehicle:
    Limited Edition Double Cab TRD off road 4WD
    I didn't have time to read all the thread....:smokertransformer:

    Just called my attention the TITLE ...... i GUESS everyone knows this

    Toyota has a recall for Lower Ball Joints....
    I got mine replaced totally free on 2016 ....
    Just make a call to your dealer with your VIN # and ask ....
    you may get surprise as I did and get them free too ! .... :hattip:
     
    eon_blue likes this.
  12. Mar 12, 2020 at 9:52 AM
    #52
    eon_blue

    eon_blue Most Improved Member

    Joined:
    Mar 4, 2016
    Member:
    #180213
    Messages:
    66,904
    Gender:
    Male
    First Name:
    Ryan
    Vehicle:
    '04 TRD 3.4l 4x4 5sp manual Xtraca & '96 4runner 4x4 5spd manual
    I can't remember for certain but I think that's only for 2001+ Tacomas or 2001 - 2002 or something like that. Was a bad batch of them one or 2 years that triggered the recall, only certain year Tacomas are affected. But definitely worth calling and finding out, my 04 was not part of the recall.
     
  13. Mar 12, 2020 at 2:48 PM
    #53
    OG_Tacoma

    OG_Tacoma Well-Known Member

    Joined:
    Nov 8, 2018
    Member:
    #272074
    Messages:
    2,194
    Gender:
    Male
    I tried looking it up on a website, and after entering the VIN for my 04, said there were no recalls for me.
     
  14. Mar 16, 2020 at 7:13 PM
    #54
    OG_Tacoma

    OG_Tacoma Well-Known Member

    Joined:
    Nov 8, 2018
    Member:
    #272074
    Messages:
    2,194
    Gender:
    Male
    I took your advice and bought some Bore Tech and nylon bore brushes. Rubbed/wiped the threads with the brushes and installed new bolts. I probably should have rinsed any loosened crud out with brake cleaner, but didn't think of it until I was done.
     

Products Discussed in

To Top