MJ's White Taco Build

2005 2.7L 5 lug tacoma
- 2.75" Readylift spacer in the front
- Running Falken WildPeak AT's 31x10.50R15LT
- UltraGuage

 

cool wheels!

 

Thanks Man!

 

DRL Mod
- Locate the power wire going into the stock DRL in my case it was green
- I used an razor blade to cut into the plastic coating on the wire to allow access to the copper wire
- I used green 12 gauge wire and wrapped the copper on that wire around the copper from the DRL, then I used electrical tape to insulate both wires
- On the blinker, there is a third hole with a rubber plug inside, Pull the rubber plug out and stick the other end of the 12 gauge wire into that
- I used E6000 gorilla glue to hold it in place ( it worked well once it dried)
- Then repeat the process on the other side






Any questions, feel free to message me

 

I figured there was a way to do that.... Thanks!
I think you may have found the easiest way.
Definitely appreciate the help.

 

You have any side view pics?

 

Love it! Nice truck

 

Thanks Man! appreciate it

 

FatBobs AAL before and after

 

That looks Killer Dude!

 

I'm starting to fabricate what I'm calling "Lift Plates" for now I am just going to make a couple and stack them on top of my existing strut spacer. Let me know if I should sell these and if you guys would be interested in buying them.

 

I would be interested in buying those. How much would they cost ?

 

Has anyone put the sport hood w/ skewp on a base tacoma? It may visually kick ass

 

You have piqued my interest

 

That could be a MOVE. If some fellas don't like a their scoops, im sure some trade or sell all the time. Ive got a super white mint hood lol message me anybody

 

Upgrades have been made, she's now sitting pretty on some 33's

 

How are you clearing 33’s??

 

Really not bad, had to trim a little bit of the inside of the bumper on both sides and had to trim the inner fender well down some, still can't go full lock to the right but that's just because I haven't had time to trim that side down to where it needs to be yet but once I find the time, I definitely will.

 

Post pics of the trimming