OEM tonneau cover install

Where do you find them

 

Hardware should come with cover. Post #32 from @Spare Parts
Mention price from dealer and part numbers on diagram.

 

What’s the part number for this piece? It seems different then the 94933C piece?

 

Does anyone have all of the part numbers so I can order them to get myself new factory tonneau cover for my '20 Tacoma DCSB TRD Sport?!

I got quote from my local dealer, its $699! No tax or anything! It includes all of the parts as well! Is it good price?

 

Im so appreciative of this forum. Thanks to this thread i was to perform the install myself. Why is the pre cut bed rails so expensive? Seriously 109 per rail. anyways ive decided to cut it myself. Is there a way to improve the seal by the tailgate?

 

If you are in Canada:
PK3B1-35J5H

If you are in the USA:
64901-09010 - Panel, Tonneau Cover Front
64902-09010 - Panel, Tonneau Cover Center
64903-09010 - Panel, Tonneau Cover Rear
64904-04010 - Hinge, Tonneau Cover Front
64905-04010 - Hinge, Tonneau Cover Rear
66248-04070 - Cover, Bed Side RH
66249-04070 - Cover, Bed Side LH
64949-04020 - Screw, Panel to Hinge (Qty: 24)
64949-04070 - Screw, Panel to Hinge (Qty: 20)
64915-04010 - Cap, Front Hinge RH
64916-04010 - Cap, Front Hinge LH
64917-04010 - Cap, Rear Hinge RH
64918-04010 - Cap, Rear Hinge LH
64949-04080 - Screw, Cap to Hinge (Qty: 8)
64933-04010 - Pin, Tonneau Cover Front
90148-A0006 - Screw, Front Pin (Qty: 2)
69442-04010 - Striker, Tonneau Cover Side No.1 (Qty: 5)
69442-04030 - Striker, Tonneau Cover Side No.2
69415-04020 - Cover, Striker No.1 (Qty: 5)
69415-04040 - Cover, Striker No.2
64949-04010 - Screw, Striker (Qty: 12)
64935-04010 - Bolt, Striker
62541-04010 - Moulding, Trim RH
62542-04010 - Moulding, Trim LH

Jeff

 

I had used black RTV Silicone and filled in all the gaps.
SORRY, I just re-read your post and I filled the gaps by the cab not by the tailgate.

 

Thanks for the info. I just removed mine. Is there a market for a used one?

 

Just depends if people in your area are in the market for an OEM Tonneau? (Supply vs Demand) I had sold mine back in 2018 and had people asking me to ship and we're willing to drive a few hours, for an OEM tonneau. I included link to my listing and good luck.
https://www.tacomaworld.com/threads...cover-for-dcsb-tampa-fl.566083/#post-18600750

 

Thank you

 

Jeff is there a part number for the whole kit?

 

If you are in Canada, PK3B1-35J5H. If you’re not in Canada, no.

Jeff

 

Thanks Jeff
I’m in Santa Barbara

 

How the hell did Canada get a full kit?

 

A smaller market means we don't typically get individual factory options. We almost exclusively get our cars (Toyota and Lexus) with option packages only. For individual options they are typically offered as port- or dealer-installed accessories, often even if they are only available as factory options in other places. A good example of this was navigation systems in the mid-2000's to mid-2010's, we often had accessory kits to add the "factory" navigation system to cars and didn't offer it as a factory option. Denso and Fujitsu-Ten manufactured a lot of various adapter harnesses that were used to install the factory nav for the Canadian market - ended up with more than a few US customers looking to get those pieces.

Jeff

 

Does anyone know if you need the pre cut bed rails for aftermarket covers as well? Not sure if that’s a stupid question or not lol

 

I believe the OEM tonneau is the only one that uses this striker style, I don't think any aftermarkets use these. So no, you don't need to cut your covers. All the aftermarkets I have seen have their own hardware for installing the strikers without removing the bed caps.

 

Awesome! Thanks! I was hoping to find an oem one since they tend to be easier to find used but I’d rather not cut into the rails or spend a couple hundred on pre cut rails