Northern Virginia Roll Call

Oh that's right. I forgot that CompTIA changed that from when I had mine. I'm just a certified nut now. It pays well.

 

https://www.pelican.com/us/en/discover/cargo-cases/

Neat solution for the bed rails if you don't have a cover. I'm sure the cost will be high, but..

 

@EatSleepTacos and @crashdb it’s not IT or security but Avixa, Crestron, and Biamp have great online training programs

 

I just ground the heads off, knocked the oem hangers off, ground rivets flat with frame, and drilled them out. It wasn’t too bad removing the oem shackle bushings was a whole different ball gane

 

I don't think I'm going to replace the bushings. I'm kind of undecided. I have a press for that either way.

 

Press only works on the rubber part not the metal sleeve

 

Anyone know the penalty for not adhering to the stay at home order?

Maryland is making it a misdemeanor, Northam has not made it clear.

 

Virginia is a Class 1 Misdemeanor, Maryland can be the same but also could include a $5000 fine

 

Is this written anywhere?

 

Everywhere, but here is a link to the order:

https://www.governor.virginia.gov/m...Order-Due-to-Novel-Coronavirus-(COVID-19).pdf

 

From a WTOP News release, Class one misdemeanor, up to 1 year in jail and $2500 fine, through June 10.

 

I'm only seeing that as referring to sections 2, 3, 4 and 5 though.

 

Because those are the only paragraphs with real restrictions. The others list what is allowed, and obviously those arent subject to a penalty

He was also very specific that he doesnt want to imprison people, so he limited its reach.

 

I'm trying to figure out if randomly driving around is considered a violation.

 

It isn't at all, based on my reading BUT some people are going to try and enforce shit id imagine

 

I know everyone is unique and that also applies to our taco's...but in my plan and talk with Eric/Archive he actually said to keep oem shackle setups.

Him not up-selling the poly bushing was a shock, but a positive.

I also bought his u-bolt flip kit with the Archive bump stops...setup the hangers for a crossbar, but didn't purchase the tube.

 

For $25 you can buy oem shackles without bushings.

 

you can buy OEM shackles, and put poly bushings in. Archive was probably talking about that.. Thats the exact setup that I have. @EatSleepTacos has the part number for the shackles

 

I am having entirely too much fun with this. Made a bottle opener today. Even hammered it thinner where it goes under the cap to make it easier.

 

We used to have to remove those frame rivets when doing certain frame repairs...still do, but rarely. Like you said, we used a small grinder to remove the head and then remove bracket. Then we used an air chisel with a blunt punch bit to pop it the rest of the way out. Like this

$14 Mayhew Pro 31979 3/8" Diameter Point Pneumatic Taper Punch

https://www.amazon.com/dp/B0015PKSNS/ref=cm_sw_r_apa_i_0EMGEb2F6X473