TRD Grill for 2017

I bought a grill for my truck and the let’s came separate so I guess I have to attach them myself which isn’t a problem. The problem is they didn’t come with any clips or anything to hold them in place on the grill. How should I do this?

 

Can you post up some Picts

 

I'm assuming Pro Grill and letters were not attached. Usually on those variants of the grill, the letters will be attached via double sided tape.

 

I think I rather use a hot glue gun than double sided tape lol

 

Ya, it’s double sided tape. Mine arrived attached. Dab of hot glue on the post and push it in should be fine.

 

Hot glue will melt in the heat, sitting in a hot parking lot in the sun.

Plastic weld them would be the best route. You melt them down with a soldering iron. If you don’t have one you can use micro torch to heat them up and press them down with a screw driver or something similar.

 

You push them in and you can melt with soldering iron what is sticking out on the back side or you can use push nuts just need to find the correct size. Maybe they forgot to include I would contact the seller.

This link is similar what you can use but don't know if the size is correct.

$9 Hard-to-Find Fastener 014973395391 Speed Push Nut, 3/32, Piece-16

https://smile.amazon.com/Hard-Find-...s=Rectangular+Push+Nuts&qid=1588165175&sr=8-6

 

Automotive GOOP works wonders....