Colorado Trading Post

@noco_taco interested in doing this?

 

SOLD!

6 qts of

$30 Mobil 1 75w-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

Mobil 1 75w-90, 1 Liter of toyota brand Transfer case oil, 1 Differential Gasket kit! Never got around to doing it myself, so paid the stealership.

100 for everything obo. Located in Aurora.

 

potentially, I’ll have to see if I can grab some numbers off a buddy’s 3rd gen to see how realistic it would be, and if it just be able to trim it a tad and weld on some new covers since it’s unpainted..... I’ll get back to you, don’t wait for me if you get any other offers though.

 

In other news, got a pair of toyo at2s (P265/70/R16) with a good amount of life left, not sure the mileage on them but they’re at .3125” tread depth and best I could find, brand new is .4000” so plenty of life. Hoping to get $250 for all 4, no plugs and nothing wrong with them, just upgraded to 33s

 

Looking for 1 single 255/85/16 to use as a spare. Already mounted to a cheap rim is a bonus.

 

I am looking for some motorcycle gear if anyone has some laying around not in use.

Medium size full face helmet - mine is literally falling apart.

Size 38ish/medium jacket - would consider leather or a synthetic, especially with spine and elbow protection

Pants or chaps - 34ish waist.

I have a cylindrical leather harley bag to offer for free to anyone who wants it.

 

I have a Helmet that may interest you, I'll have to get some pictures of it later, could try to get them up around 6:30 timeframe

 

2017 Tacoma trd off-road taillights. Put about 10k miles on them before I traded them out for the 18’s.

Make me an offer!

 

3rd gen tri fold Bakflip VP tonneau cover. Condition is fair. There is a rip towards the passenger side. It is not all the way through. About 2 inches long. Not sure what to ask for this so I’ll leave it up to you. Also the last panel seems to have come unglued? Located in aurora PM with offers. Thanks !

 

Sounds good. No major rush. Thanks!

 

I would offer to buy you this outfit but I know you would have no problem rocking it.

Probably even wear it on our wheeling trips to.

 

Sold some shit...found some shit. Decided some stuff is worthless...Updating and bumping. I will ship small stuff on your dime.

Access cab floor mats - Free!

Shit condition. Going in the trash if no one wants them.



Fog light - free!

Hazy, dirty...lightbuld might be good.



5 ft firestick CB attena - free!

Needs a tuning tip.



DAMAGED 2007 FJ cruiser tcase 175k miles for Auto trans (23 spline)
Can anyone just go ahead and weld this crack for me? Thinking I will just keep it as a spare at this point.





2009 Tacoma Transfer case 104k miles for manual trans with actuator (22 spline) - $200 PRICE REDUCED

2009 Tacoma front ADD tube with actuator 104k - $100 PRICE REDUCED

2009 Tacoma 4wd ecu - $75 PRICE REDUCED

If you have ever replaced either of the actuators, you know this is a steal on the ADD actuator and the tcase. You'll pay a few hundred for each of those, new or used. These were all pulled from my truck at 104K in perfect working order, actuators and all. I split the tcase to pull the input shaft so I could have a crawl box adapter made. Its assembled but the case is not sealed so you'll have to take it apart to seal it. Theres no speed sensor but the rear output has the required worm gear for the manual trans...it curently has the FJ filler plug. The shift rail sensors are also from an FJ so you'll have to solder your own connectors and torque those. The input flange cover also needs to be removed and sealed and properly torqued. Everything inside is properly torqued.

The ADD tube has the support arm bolts and the star bolts for the diff.





BRAND NEW in BOX Tacoma Speed Sensor for Manual - Beck Arnley (Not pictured) - $50

$60 Beck/Arnley Speed Sensor - 090-5033

https://www.amazon.com/gp/product/B000EOGW90/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
This is for the manual transmission (i think pre-2012 only) where the speed sensor is on the back of the tcase. Will not work for those with speed sensors on the wheel.

I will also include the in cab 4wd switch which is still installed in my truck for someone who wants the taco parts.

Steel bed bars - $50

Bought from another member like 2 years ago and never used them. Includes mounting hardware to bolt into rails. 61" wide

Edit: These sit on top of the rails and attach via t-slot nuts.




mud flaps -free!



Driver side spindle. 97k miles on it. -$100

I am pretty sure it's not bent. I bent my passenger and replaced both with a set of gusseted ones so this is my original driver.



TRD shift knob $20



Passenger side power mirror - $20

Black in color. The connector is missing because it's a bitch to feed it back through the mounting bracket so I cut that shit.



4x 55w PIAA lights - $50

Truth be told I was super disappointed with these. I think i paid around $110 for both sets. Ran two as fog lights and two on the bumper. I couldn't tell when they were on. I dont have the original relays as I wired them to my own in cab switches. Two are missing the nuts because they rattled off.

 

I believe I might have a tuning tip for the Firestick

 

Oh, stop it. I already have a pink tu tu but that helmet is dope. Please send a link

 

Co springs
$450 best top for a short bed. Really good condition, no tears or broken zippers. Just extremely dirty. Usually just sits folded down with the windows in the backseat.

Comes with a cleaning kit that has been used like once

 

just the tip?

 

Its all about the tip.

 

All I got for you babe

 

Do you have the bumper caps on them? What color

 

(4) + spare = $400

Bridgestone Dueller H/T 265/70/17 with less than 10K miles. Came off our 2016 Trail Edition 4Runner.